Monarch Pine Microply
40 products
1/16" Microply Alder
1/16" Microply Alder from Monarch Pine. 1/16" Microply Alder from Monarch Pine — a premium wood…
1/16" Microply Aromatic Cedar
1/16" Microply Aromatic Cedar from Monarch Pine. 1/16" Microply Aromatic Cedar from Monarch Pine — a…
1/16" Microply Birch
1/16" Microply Birch from Monarch Pine. 1/16" Microply Birch from Monarch Pine — a premium wood…
1/16" Microply Birch (20 Pack)
1/16" Microply Birch (20 Pack) from Monarch Pine. 1/16" Microply Birch (20 Pack) from Monarch Pine…
1/16" Microply Cherry
1/16" Microply Cherry from Monarch Pine. 1/16" Microply Cherry from Monarch Pine — a premium wood…
1/16" Microply Hickory
1/16" Microply Hickory from Monarch Pine. 1/16" Microply Hickory from Monarch Pine — a premium wood…
1/16" Microply Mahogany
1/16" Microply Mahogany from Monarch Pine. 1/16" Microply Mahogany from Monarch Pine — a premium wood…
1/16" Microply Maple
1/16" Microply Maple from Monarch Pine. 1/16" Microply Maple from Monarch Pine — a premium wood…
1/16" Microply Red Oak
1/16" Microply Red Oak from Monarch Pine. 1/16" Microply Red Oak from Monarch Pine — a…
1/16" Microply Sapele
1/16" Microply Sapele from Monarch Pine. 1/16" Microply Sapele from Monarch Pine — a premium wood…
1/16" Microply Walnut
1/16" Microply Walnut from Monarch Pine. 1/16" Microply Walnut from Monarch Pine — a premium wood…
1/16" Microply White Birch
1/16" Microply White Birch from Monarch Pine. 1/16" Microply White Birch from Monarch Pine — a…
1/16" Microply White Oak
1/16" Microply White Oak from Monarch Pine. 1/16" Microply White Oak from Monarch Pine — a…
1/4" Microply Alder
1/4" Microply Alder from Monarch Pine. 1/4" Microply Alder from Monarch Pine — a premium wood…
1/4" Microply Aromatic Cedar
1/4" Microply Aromatic Cedar from Monarch Pine. 1/4" Microply Aromatic Cedar from Monarch Pine — a…
1/4" Microply Birch
1/4" Microply Birch from Monarch Pine. 1/4" Microply Birch from Monarch Pine — a premium wood…
1/4" Microply Cherry
1/4" Microply Cherry from Monarch Pine. 1/4" Microply Cherry from Monarch Pine — a premium wood…
1/4" Microply Hickory
1/4" Microply Hickory from Monarch Pine. 1/4" Microply Hickory from Monarch Pine — a premium wood…
1/4" Microply Mahogany
1/4" Microply Mahogany from Monarch Pine. 1/4" Microply Mahogany from Monarch Pine — a premium wood…
1/4" Microply Maple
1/4" Microply Maple from Monarch Pine. 1/4" Microply Maple from Monarch Pine — a premium wood…
1/4" Microply Red Oak
1/4" Microply Red Oak from Monarch Pine. 1/4" Microply Red Oak from Monarch Pine — a…
1/4" Microply Sapele
1/4" Microply Sapele from Monarch Pine. 1/4" Microply Sapele from Monarch Pine — a premium wood…
1/4" Microply Walnut
1/4" Microply Walnut from Monarch Pine. 1/4" Microply Walnut from Monarch Pine — a premium wood…
1/4" Microply White Birch
1/4" Microply White Birch from Monarch Pine. 1/4" Microply White Birch from Monarch Pine — a…
1/4" Microply White Oak
1/4" Microply White Oak from Monarch Pine. 1/4" Microply White Oak from Monarch Pine — a…
1/8" Microply Alder
1/8" Microply Alder from Monarch Pine. 1/8" Microply Alder from Monarch Pine — a premium wood…
1/8" Microply Aromatic Cedar
1/8" Microply Aromatic Cedar from Monarch Pine. 1/8" Microply Aromatic Cedar from Monarch Pine — a…
1/8" Microply Birch
1/8" Microply Birch from Monarch Pine. 1/8" Microply Birch from Monarch Pine — a premium wood…
1/8" Microply Birch (Pack Of 20)
1/8" Microply Birch (Pack Of 20) from Monarch Pine. 1/8" Microply Birch (Pack Of 20) from…
1/8" Microply Cherry
1/8" Microply Cherry from Monarch Pine. 1/8" Microply Cherry from Monarch Pine — a premium wood…
1/8" Microply Hickory
1/8" Microply Hickory from Monarch Pine. 1/8" Microply Hickory from Monarch Pine — a premium wood…
1/8" Microply Mahogany
1/8" Microply Mahogany from Monarch Pine. 1/8" Microply Mahogany from Monarch Pine — a premium wood…
1/8" Microply Maple
1/8" Microply Maple from Monarch Pine. 1/8" Microply Maple from Monarch Pine — a premium wood…
1/8" Microply Red Oak
1/8" Microply Red Oak from Monarch Pine. 1/8" Microply Red Oak from Monarch Pine — a…
1/8" Microply Sample Pack!
1/8" Microply Sample Pack! from Monarch Pine. 1/8" Microply Sample Pack! from Monarch Pine — a…
1/8" Microply Sapele
1/8" Microply Sapele from Monarch Pine. 1/8" Microply Sapele from Monarch Pine — a premium wood…
1/8" Microply Walnut
1/8" Microply Walnut from Monarch Pine. 1/8" Microply Walnut from Monarch Pine — a premium wood…
1/8" Microply White Birch
1/8" Microply White Birch from Monarch Pine. 1/8" Microply White Birch from Monarch Pine — a…
1/8" Microply White Oak
1/8" Microply White Oak from Monarch Pine. 1/8" Microply White Oak from Monarch Pine — a…
Microply Pack of 18 (Includes 6 Cherry, 6 Maple, 6 Walnut)
Microply Pack of 18 (Includes 6 Cherry, 6 Maple, 6 Walnut) from Monarch Pine. Microply Pack…
1/16″ Microply Alder from Monarch Pine. 1/16″ Microply Alder from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
WOOD BLANK
1/16″ Microply Alder
1/16″ Microply Alder from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
Overview
1/16″ Microply Alder is crafted from quality wood material, offering a natural and warm aesthetic for custom engravings. The surface takes laser engraving cleanly, producing sharp contrast between the engraved and natural wood areas.
Compatible with CO₂ laser systems, these blanks are perfect for personalized gifts, jewelry, home décor, and maker projects. The wood grain adds unique character to every piece.
Specifications
Material
Wood (MDF, Baltic birch, or hardwood)
Laser Type
CO₂ laser systems
Finish
Natural / unfinished
Supplier
Monarch Pine
Price
$9.00
✅ Use Cases
- Personalized ornaments & keepsakes
- Custom jewelry & earrings
- Engraved signage & décor
- Wedding & event favors
- Maker craft projects
🔥 Engraving Tips
- Use masking tape to prevent smoke staining around the engraving
- Lower speed and higher power for deeper engravings
- Sand lightly after engraving to remove char residue
- Apply a finish coat to seal and protect the engraving
- Test on scrap wood first to dial in your settings
1/16″ Microply Aromatic Cedar from Monarch Pine. 1/16″ Microply Aromatic Cedar from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
WOOD BLANK
1/16″ Microply Aromatic Cedar
1/16″ Microply Aromatic Cedar from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
Overview
1/16″ Microply Aromatic Cedar is crafted from quality wood material, offering a natural and warm aesthetic for custom engravings. The surface takes laser engraving cleanly, producing sharp contrast between the engraved and natural wood areas.
Compatible with CO₂ laser systems, these blanks are perfect for personalized gifts, jewelry, home décor, and maker projects. The wood grain adds unique character to every piece.
Specifications
Material
Wood (MDF, Baltic birch, or hardwood)
Laser Type
CO₂ laser systems
Finish
Natural / unfinished
Supplier
Monarch Pine
Price
$11.00
✅ Use Cases
- Personalized ornaments & keepsakes
- Custom jewelry & earrings
- Engraved signage & décor
- Wedding & event favors
- Maker craft projects
🔥 Engraving Tips
- Use masking tape to prevent smoke staining around the engraving
- Lower speed and higher power for deeper engravings
- Sand lightly after engraving to remove char residue
- Apply a finish coat to seal and protect the engraving
- Test on scrap wood first to dial in your settings
1/16″ Microply Birch from Monarch Pine. 1/16″ Microply Birch from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
WOOD BLANK
1/16″ Microply Birch
1/16″ Microply Birch from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
Overview
1/16″ Microply Birch is crafted from quality wood material, offering a natural and warm aesthetic for custom engravings. The surface takes laser engraving cleanly, producing sharp contrast between the engraved and natural wood areas.
Compatible with CO₂ laser systems, these blanks are perfect for personalized gifts, jewelry, home décor, and maker projects. The wood grain adds unique character to every piece.
Specifications
Material
Wood (MDF, Baltic birch, or hardwood)
Laser Type
CO₂ laser systems
Finish
Natural / unfinished
Supplier
Monarch Pine
Price
$7.00
✅ Use Cases
- Personalized ornaments & keepsakes
- Custom jewelry & earrings
- Engraved signage & décor
- Wedding & event favors
- Maker craft projects
🔥 Engraving Tips
- Use masking tape to prevent smoke staining around the engraving
- Lower speed and higher power for deeper engravings
- Sand lightly after engraving to remove char residue
- Apply a finish coat to seal and protect the engraving
- Test on scrap wood first to dial in your settings
1/16″ Microply Birch (20 Pack) from Monarch Pine. 1/16″ Microply Birch (20 Pack) from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
WOOD BLANK
1/16″ Microply Birch (20 Pack)
1/16″ Microply Birch (20 Pack) from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
Overview
1/16″ Microply Birch (20 Pack) is crafted from quality wood material, offering a natural and warm aesthetic for custom engravings. The surface takes laser engraving cleanly, producing sharp contrast between the engraved and natural wood areas.
Compatible with CO₂ laser systems, these blanks are perfect for personalized gifts, jewelry, home décor, and maker projects. The wood grain adds unique character to every piece.
Specifications
Material
Wood (MDF, Baltic birch, or hardwood)
Laser Type
CO₂ laser systems
Finish
Natural / unfinished
Supplier
Monarch Pine
Price
$125.00
✅ Use Cases
- Personalized ornaments & keepsakes
- Custom jewelry & earrings
- Engraved signage & décor
- Wedding & event favors
- Maker craft projects
🔥 Engraving Tips
- Use masking tape to prevent smoke staining around the engraving
- Lower speed and higher power for deeper engravings
- Sand lightly after engraving to remove char residue
- Apply a finish coat to seal and protect the engraving
- Test on scrap wood first to dial in your settings
1/16″ Microply Cherry from Monarch Pine. 1/16″ Microply Cherry from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
WOOD BLANK
1/16″ Microply Cherry
1/16″ Microply Cherry from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
Overview
1/16″ Microply Cherry is crafted from quality wood material, offering a natural and warm aesthetic for custom engravings. The surface takes laser engraving cleanly, producing sharp contrast between the engraved and natural wood areas.
Compatible with CO₂ laser systems, these blanks are perfect for personalized gifts, jewelry, home décor, and maker projects. The wood grain adds unique character to every piece.
Specifications
Material
Wood (MDF, Baltic birch, or hardwood)
Laser Type
CO₂ laser systems
Finish
Natural / unfinished
Supplier
Monarch Pine
Price
$9.50
✅ Use Cases
- Personalized ornaments & keepsakes
- Custom jewelry & earrings
- Engraved signage & décor
- Wedding & event favors
- Maker craft projects
🔥 Engraving Tips
- Use masking tape to prevent smoke staining around the engraving
- Lower speed and higher power for deeper engravings
- Sand lightly after engraving to remove char residue
- Apply a finish coat to seal and protect the engraving
- Test on scrap wood first to dial in your settings
1/16″ Microply Hickory from Monarch Pine. 1/16″ Microply Hickory from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
WOOD BLANK
1/16″ Microply Hickory
1/16″ Microply Hickory from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
Overview
1/16″ Microply Hickory is crafted from quality wood material, offering a natural and warm aesthetic for custom engravings. The surface takes laser engraving cleanly, producing sharp contrast between the engraved and natural wood areas.
Compatible with CO₂ laser systems, these blanks are perfect for personalized gifts, jewelry, home décor, and maker projects. The wood grain adds unique character to every piece.
Specifications
Material
Wood (MDF, Baltic birch, or hardwood)
Laser Type
CO₂ laser systems
Finish
Natural / unfinished
Supplier
Monarch Pine
Price
$9.50
✅ Use Cases
- Personalized ornaments & keepsakes
- Custom jewelry & earrings
- Engraved signage & décor
- Wedding & event favors
- Maker craft projects
🔥 Engraving Tips
- Use masking tape to prevent smoke staining around the engraving
- Lower speed and higher power for deeper engravings
- Sand lightly after engraving to remove char residue
- Apply a finish coat to seal and protect the engraving
- Test on scrap wood first to dial in your settings
1/16″ Microply Mahogany from Monarch Pine. 1/16″ Microply Mahogany from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
WOOD BLANK
1/16″ Microply Mahogany
1/16″ Microply Mahogany from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
Overview
1/16″ Microply Mahogany is crafted from quality wood material, offering a natural and warm aesthetic for custom engravings. The surface takes laser engraving cleanly, producing sharp contrast between the engraved and natural wood areas.
Compatible with CO₂ laser systems, these blanks are perfect for personalized gifts, jewelry, home décor, and maker projects. The wood grain adds unique character to every piece.
Specifications
Material
Wood (MDF, Baltic birch, or hardwood)
Laser Type
CO₂ laser systems
Finish
Natural / unfinished
Supplier
Monarch Pine
Price
$11.50
✅ Use Cases
- Personalized ornaments & keepsakes
- Custom jewelry & earrings
- Engraved signage & décor
- Wedding & event favors
- Maker craft projects
🔥 Engraving Tips
- Use masking tape to prevent smoke staining around the engraving
- Lower speed and higher power for deeper engravings
- Sand lightly after engraving to remove char residue
- Apply a finish coat to seal and protect the engraving
- Test on scrap wood first to dial in your settings
1/16″ Microply Maple from Monarch Pine. 1/16″ Microply Maple from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
WOOD BLANK
1/16″ Microply Maple
1/16″ Microply Maple from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
Overview
1/16″ Microply Maple is crafted from quality wood material, offering a natural and warm aesthetic for custom engravings. The surface takes laser engraving cleanly, producing sharp contrast between the engraved and natural wood areas.
Compatible with CO₂ laser systems, these blanks are perfect for personalized gifts, jewelry, home décor, and maker projects. The wood grain adds unique character to every piece.
Specifications
Material
Wood (MDF, Baltic birch, or hardwood)
Laser Type
CO₂ laser systems
Finish
Natural / unfinished
Supplier
Monarch Pine
Price
$9.50
✅ Use Cases
- Personalized ornaments & keepsakes
- Custom jewelry & earrings
- Engraved signage & décor
- Wedding & event favors
- Maker craft projects
🔥 Engraving Tips
- Use masking tape to prevent smoke staining around the engraving
- Lower speed and higher power for deeper engravings
- Sand lightly after engraving to remove char residue
- Apply a finish coat to seal and protect the engraving
- Test on scrap wood first to dial in your settings
1/16″ Microply Red Oak from Monarch Pine. 1/16″ Microply Red Oak from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
WOOD BLANK
1/16″ Microply Red Oak
1/16″ Microply Red Oak from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
Overview
1/16″ Microply Red Oak is crafted from quality wood material, offering a natural and warm aesthetic for custom engravings. The surface takes laser engraving cleanly, producing sharp contrast between the engraved and natural wood areas.
Compatible with CO₂ laser systems, these blanks are perfect for personalized gifts, jewelry, home décor, and maker projects. The wood grain adds unique character to every piece.
Specifications
Material
Wood (MDF, Baltic birch, or hardwood)
Laser Type
CO₂ laser systems
Finish
Natural / unfinished
Supplier
Monarch Pine
Price
$9.50
✅ Use Cases
- Personalized ornaments & keepsakes
- Custom jewelry & earrings
- Engraved signage & décor
- Wedding & event favors
- Maker craft projects
🔥 Engraving Tips
- Use masking tape to prevent smoke staining around the engraving
- Lower speed and higher power for deeper engravings
- Sand lightly after engraving to remove char residue
- Apply a finish coat to seal and protect the engraving
- Test on scrap wood first to dial in your settings
1/16″ Microply Sapele from Monarch Pine. 1/16″ Microply Sapele from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
WOOD BLANK
1/16″ Microply Sapele
1/16″ Microply Sapele from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
Overview
1/16″ Microply Sapele is crafted from quality wood material, offering a natural and warm aesthetic for custom engravings. The surface takes laser engraving cleanly, producing sharp contrast between the engraved and natural wood areas.
Compatible with CO₂ laser systems, these blanks are perfect for personalized gifts, jewelry, home décor, and maker projects. The wood grain adds unique character to every piece.
Specifications
Material
Wood (MDF, Baltic birch, or hardwood)
Laser Type
CO₂ laser systems
Finish
Natural / unfinished
Supplier
Monarch Pine
Price
$12.00
✅ Use Cases
- Personalized ornaments & keepsakes
- Custom jewelry & earrings
- Engraved signage & décor
- Wedding & event favors
- Maker craft projects
🔥 Engraving Tips
- Use masking tape to prevent smoke staining around the engraving
- Lower speed and higher power for deeper engravings
- Sand lightly after engraving to remove char residue
- Apply a finish coat to seal and protect the engraving
- Test on scrap wood first to dial in your settings
1/16″ Microply Walnut from Monarch Pine. 1/16″ Microply Walnut from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
WOOD BLANK
1/16″ Microply Walnut
1/16″ Microply Walnut from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
Overview
1/16″ Microply Walnut is crafted from quality wood material, offering a natural and warm aesthetic for custom engravings. The surface takes laser engraving cleanly, producing sharp contrast between the engraved and natural wood areas.
Compatible with CO₂ laser systems, these blanks are perfect for personalized gifts, jewelry, home décor, and maker projects. The wood grain adds unique character to every piece.
Specifications
Material
Wood (MDF, Baltic birch, or hardwood)
Laser Type
CO₂ laser systems
Finish
Natural / unfinished
Supplier
Monarch Pine
Price
$10.50
✅ Use Cases
- Personalized ornaments & keepsakes
- Custom jewelry & earrings
- Engraved signage & décor
- Wedding & event favors
- Maker craft projects
🔥 Engraving Tips
- Use masking tape to prevent smoke staining around the engraving
- Lower speed and higher power for deeper engravings
- Sand lightly after engraving to remove char residue
- Apply a finish coat to seal and protect the engraving
- Test on scrap wood first to dial in your settings
1/16″ Microply White Birch from Monarch Pine. 1/16″ Microply White Birch from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
WOOD BLANK
1/16″ Microply White Birch
1/16″ Microply White Birch from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
Overview
1/16″ Microply White Birch is crafted from quality wood material, offering a natural and warm aesthetic for custom engravings. The surface takes laser engraving cleanly, producing sharp contrast between the engraved and natural wood areas.
Compatible with CO₂ laser systems, these blanks are perfect for personalized gifts, jewelry, home décor, and maker projects. The wood grain adds unique character to every piece.
Specifications
Material
Wood (MDF, Baltic birch, or hardwood)
Laser Type
CO₂ laser systems
Finish
Natural / unfinished
Supplier
Monarch Pine
Price
$9.00
✅ Use Cases
- Personalized ornaments & keepsakes
- Custom jewelry & earrings
- Engraved signage & décor
- Wedding & event favors
- Maker craft projects
🔥 Engraving Tips
- Use masking tape to prevent smoke staining around the engraving
- Lower speed and higher power for deeper engravings
- Sand lightly after engraving to remove char residue
- Apply a finish coat to seal and protect the engraving
- Test on scrap wood first to dial in your settings
1/16″ Microply White Oak from Monarch Pine. 1/16″ Microply White Oak from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
WOOD BLANK
1/16″ Microply White Oak
1/16″ Microply White Oak from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
Overview
1/16″ Microply White Oak is crafted from quality wood material, offering a natural and warm aesthetic for custom engravings. The surface takes laser engraving cleanly, producing sharp contrast between the engraved and natural wood areas.
Compatible with CO₂ laser systems, these blanks are perfect for personalized gifts, jewelry, home décor, and maker projects. The wood grain adds unique character to every piece.
Specifications
Material
Wood (MDF, Baltic birch, or hardwood)
Laser Type
CO₂ laser systems
Finish
Natural / unfinished
Supplier
Monarch Pine
Price
$9.50
✅ Use Cases
- Personalized ornaments & keepsakes
- Custom jewelry & earrings
- Engraved signage & décor
- Wedding & event favors
- Maker craft projects
🔥 Engraving Tips
- Use masking tape to prevent smoke staining around the engraving
- Lower speed and higher power for deeper engravings
- Sand lightly after engraving to remove char residue
- Apply a finish coat to seal and protect the engraving
- Test on scrap wood first to dial in your settings
1/4″ Microply Alder from Monarch Pine. 1/4″ Microply Alder from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
WOOD BLANK
1/4″ Microply Alder
1/4″ Microply Alder from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
Overview
1/4″ Microply Alder is crafted from quality wood material, offering a natural and warm aesthetic for custom engravings. The surface takes laser engraving cleanly, producing sharp contrast between the engraved and natural wood areas.
Compatible with CO₂ laser systems, these blanks are perfect for personalized gifts, jewelry, home décor, and maker projects. The wood grain adds unique character to every piece.
Specifications
Material
Wood (MDF, Baltic birch, or hardwood)
Laser Type
CO₂ laser systems
Finish
Natural / unfinished
Supplier
Monarch Pine
Price
$11.00
✅ Use Cases
- Personalized ornaments & keepsakes
- Custom jewelry & earrings
- Engraved signage & décor
- Wedding & event favors
- Maker craft projects
🔥 Engraving Tips
- Use masking tape to prevent smoke staining around the engraving
- Lower speed and higher power for deeper engravings
- Sand lightly after engraving to remove char residue
- Apply a finish coat to seal and protect the engraving
- Test on scrap wood first to dial in your settings
1/4″ Microply Aromatic Cedar from Monarch Pine. 1/4″ Microply Aromatic Cedar from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
WOOD BLANK
1/4″ Microply Aromatic Cedar
1/4″ Microply Aromatic Cedar from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
Overview
1/4″ Microply Aromatic Cedar is crafted from quality wood material, offering a natural and warm aesthetic for custom engravings. The surface takes laser engraving cleanly, producing sharp contrast between the engraved and natural wood areas.
Compatible with CO₂ laser systems, these blanks are perfect for personalized gifts, jewelry, home décor, and maker projects. The wood grain adds unique character to every piece.
Specifications
Material
Wood (MDF, Baltic birch, or hardwood)
Laser Type
CO₂ laser systems
Finish
Natural / unfinished
Supplier
Monarch Pine
Price
$13.00
✅ Use Cases
- Personalized ornaments & keepsakes
- Custom jewelry & earrings
- Engraved signage & décor
- Wedding & event favors
- Maker craft projects
🔥 Engraving Tips
- Use masking tape to prevent smoke staining around the engraving
- Lower speed and higher power for deeper engravings
- Sand lightly after engraving to remove char residue
- Apply a finish coat to seal and protect the engraving
- Test on scrap wood first to dial in your settings
1/4″ Microply Birch from Monarch Pine. 1/4″ Microply Birch from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
WOOD BLANK
1/4″ Microply Birch
1/4″ Microply Birch from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
Overview
1/4″ Microply Birch is crafted from quality wood material, offering a natural and warm aesthetic for custom engravings. The surface takes laser engraving cleanly, producing sharp contrast between the engraved and natural wood areas.
Compatible with CO₂ laser systems, these blanks are perfect for personalized gifts, jewelry, home décor, and maker projects. The wood grain adds unique character to every piece.
Specifications
Material
Wood (MDF, Baltic birch, or hardwood)
Laser Type
CO₂ laser systems
Finish
Natural / unfinished
Supplier
Monarch Pine
Price
$9.50
✅ Use Cases
- Personalized ornaments & keepsakes
- Custom jewelry & earrings
- Engraved signage & décor
- Wedding & event favors
- Maker craft projects
🔥 Engraving Tips
- Use masking tape to prevent smoke staining around the engraving
- Lower speed and higher power for deeper engravings
- Sand lightly after engraving to remove char residue
- Apply a finish coat to seal and protect the engraving
- Test on scrap wood first to dial in your settings
1/4″ Microply Cherry from Monarch Pine. 1/4″ Microply Cherry from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
WOOD BLANK
1/4″ Microply Cherry
1/4″ Microply Cherry from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
Overview
1/4″ Microply Cherry is crafted from quality wood material, offering a natural and warm aesthetic for custom engravings. The surface takes laser engraving cleanly, producing sharp contrast between the engraved and natural wood areas.
Compatible with CO₂ laser systems, these blanks are perfect for personalized gifts, jewelry, home décor, and maker projects. The wood grain adds unique character to every piece.
Specifications
Material
Wood (MDF, Baltic birch, or hardwood)
Laser Type
CO₂ laser systems
Finish
Natural / unfinished
Supplier
Monarch Pine
Price
$11.50
✅ Use Cases
- Personalized ornaments & keepsakes
- Custom jewelry & earrings
- Engraved signage & décor
- Wedding & event favors
- Maker craft projects
🔥 Engraving Tips
- Use masking tape to prevent smoke staining around the engraving
- Lower speed and higher power for deeper engravings
- Sand lightly after engraving to remove char residue
- Apply a finish coat to seal and protect the engraving
- Test on scrap wood first to dial in your settings
1/4″ Microply Hickory from Monarch Pine. 1/4″ Microply Hickory from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
WOOD BLANK
1/4″ Microply Hickory
1/4″ Microply Hickory from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
Overview
1/4″ Microply Hickory is crafted from quality wood material, offering a natural and warm aesthetic for custom engravings. The surface takes laser engraving cleanly, producing sharp contrast between the engraved and natural wood areas.
Compatible with CO₂ laser systems, these blanks are perfect for personalized gifts, jewelry, home décor, and maker projects. The wood grain adds unique character to every piece.
Specifications
Material
Wood (MDF, Baltic birch, or hardwood)
Laser Type
CO₂ laser systems
Finish
Natural / unfinished
Supplier
Monarch Pine
Price
$11.00
✅ Use Cases
- Personalized ornaments & keepsakes
- Custom jewelry & earrings
- Engraved signage & décor
- Wedding & event favors
- Maker craft projects
🔥 Engraving Tips
- Use masking tape to prevent smoke staining around the engraving
- Lower speed and higher power for deeper engravings
- Sand lightly after engraving to remove char residue
- Apply a finish coat to seal and protect the engraving
- Test on scrap wood first to dial in your settings
1/4″ Microply Mahogany from Monarch Pine. 1/4″ Microply Mahogany from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
WOOD BLANK
1/4″ Microply Mahogany
1/4″ Microply Mahogany from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
Overview
1/4″ Microply Mahogany is crafted from quality wood material, offering a natural and warm aesthetic for custom engravings. The surface takes laser engraving cleanly, producing sharp contrast between the engraved and natural wood areas.
Compatible with CO₂ laser systems, these blanks are perfect for personalized gifts, jewelry, home décor, and maker projects. The wood grain adds unique character to every piece.
Specifications
Material
Wood (MDF, Baltic birch, or hardwood)
Laser Type
CO₂ laser systems
Finish
Natural / unfinished
Supplier
Monarch Pine
Price
$12.50
✅ Use Cases
- Personalized ornaments & keepsakes
- Custom jewelry & earrings
- Engraved signage & décor
- Wedding & event favors
- Maker craft projects
🔥 Engraving Tips
- Use masking tape to prevent smoke staining around the engraving
- Lower speed and higher power for deeper engravings
- Sand lightly after engraving to remove char residue
- Apply a finish coat to seal and protect the engraving
- Test on scrap wood first to dial in your settings
1/4″ Microply Maple from Monarch Pine. 1/4″ Microply Maple from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
WOOD BLANK
1/4″ Microply Maple
1/4″ Microply Maple from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
Overview
1/4″ Microply Maple is crafted from quality wood material, offering a natural and warm aesthetic for custom engravings. The surface takes laser engraving cleanly, producing sharp contrast between the engraved and natural wood areas.
Compatible with CO₂ laser systems, these blanks are perfect for personalized gifts, jewelry, home décor, and maker projects. The wood grain adds unique character to every piece.
Specifications
Material
Wood (MDF, Baltic birch, or hardwood)
Laser Type
CO₂ laser systems
Finish
Natural / unfinished
Supplier
Monarch Pine
Price
$11.50
✅ Use Cases
- Personalized ornaments & keepsakes
- Custom jewelry & earrings
- Engraved signage & décor
- Wedding & event favors
- Maker craft projects
🔥 Engraving Tips
- Use masking tape to prevent smoke staining around the engraving
- Lower speed and higher power for deeper engravings
- Sand lightly after engraving to remove char residue
- Apply a finish coat to seal and protect the engraving
- Test on scrap wood first to dial in your settings
1/4″ Microply Red Oak from Monarch Pine. 1/4″ Microply Red Oak from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
WOOD BLANK
1/4″ Microply Red Oak
1/4″ Microply Red Oak from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
Overview
1/4″ Microply Red Oak is crafted from quality wood material, offering a natural and warm aesthetic for custom engravings. The surface takes laser engraving cleanly, producing sharp contrast between the engraved and natural wood areas.
Compatible with CO₂ laser systems, these blanks are perfect for personalized gifts, jewelry, home décor, and maker projects. The wood grain adds unique character to every piece.
Specifications
Material
Wood (MDF, Baltic birch, or hardwood)
Laser Type
CO₂ laser systems
Finish
Natural / unfinished
Supplier
Monarch Pine
Price
$11.50
✅ Use Cases
- Personalized ornaments & keepsakes
- Custom jewelry & earrings
- Engraved signage & décor
- Wedding & event favors
- Maker craft projects
🔥 Engraving Tips
- Use masking tape to prevent smoke staining around the engraving
- Lower speed and higher power for deeper engravings
- Sand lightly after engraving to remove char residue
- Apply a finish coat to seal and protect the engraving
- Test on scrap wood first to dial in your settings
1/4″ Microply Sapele from Monarch Pine. 1/4″ Microply Sapele from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
WOOD BLANK
1/4″ Microply Sapele
1/4″ Microply Sapele from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
Overview
1/4″ Microply Sapele is crafted from quality wood material, offering a natural and warm aesthetic for custom engravings. The surface takes laser engraving cleanly, producing sharp contrast between the engraved and natural wood areas.
Compatible with CO₂ laser systems, these blanks are perfect for personalized gifts, jewelry, home décor, and maker projects. The wood grain adds unique character to every piece.
Specifications
Material
Wood (MDF, Baltic birch, or hardwood)
Laser Type
CO₂ laser systems
Finish
Natural / unfinished
Supplier
Monarch Pine
Price
$14.00
✅ Use Cases
- Personalized ornaments & keepsakes
- Custom jewelry & earrings
- Engraved signage & décor
- Wedding & event favors
- Maker craft projects
🔥 Engraving Tips
- Use masking tape to prevent smoke staining around the engraving
- Lower speed and higher power for deeper engravings
- Sand lightly after engraving to remove char residue
- Apply a finish coat to seal and protect the engraving
- Test on scrap wood first to dial in your settings
1/4″ Microply Walnut from Monarch Pine. 1/4″ Microply Walnut from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
WOOD BLANK
1/4″ Microply Walnut
1/4″ Microply Walnut from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
Overview
1/4″ Microply Walnut is crafted from quality wood material, offering a natural and warm aesthetic for custom engravings. The surface takes laser engraving cleanly, producing sharp contrast between the engraved and natural wood areas.
Compatible with CO₂ laser systems, these blanks are perfect for personalized gifts, jewelry, home décor, and maker projects. The wood grain adds unique character to every piece.
Specifications
Material
Wood (MDF, Baltic birch, or hardwood)
Laser Type
CO₂ laser systems
Finish
Natural / unfinished
Supplier
Monarch Pine
Price
$12.50
✅ Use Cases
- Personalized ornaments & keepsakes
- Custom jewelry & earrings
- Engraved signage & décor
- Wedding & event favors
- Maker craft projects
🔥 Engraving Tips
- Use masking tape to prevent smoke staining around the engraving
- Lower speed and higher power for deeper engravings
- Sand lightly after engraving to remove char residue
- Apply a finish coat to seal and protect the engraving
- Test on scrap wood first to dial in your settings
1/4″ Microply White Birch from Monarch Pine. 1/4″ Microply White Birch from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
WOOD BLANK
1/4″ Microply White Birch
1/4″ Microply White Birch from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
Overview
1/4″ Microply White Birch is crafted from quality wood material, offering a natural and warm aesthetic for custom engravings. The surface takes laser engraving cleanly, producing sharp contrast between the engraved and natural wood areas.
Compatible with CO₂ laser systems, these blanks are perfect for personalized gifts, jewelry, home décor, and maker projects. The wood grain adds unique character to every piece.
Specifications
Material
Wood (MDF, Baltic birch, or hardwood)
Laser Type
CO₂ laser systems
Finish
Natural / unfinished
Supplier
Monarch Pine
Price
$11.00
✅ Use Cases
- Personalized ornaments & keepsakes
- Custom jewelry & earrings
- Engraved signage & décor
- Wedding & event favors
- Maker craft projects
🔥 Engraving Tips
- Use masking tape to prevent smoke staining around the engraving
- Lower speed and higher power for deeper engravings
- Sand lightly after engraving to remove char residue
- Apply a finish coat to seal and protect the engraving
- Test on scrap wood first to dial in your settings
1/4″ Microply White Oak from Monarch Pine. 1/4″ Microply White Oak from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
WOOD BLANK
1/4″ Microply White Oak
1/4″ Microply White Oak from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
Overview
1/4″ Microply White Oak is crafted from quality wood material, offering a natural and warm aesthetic for custom engravings. The surface takes laser engraving cleanly, producing sharp contrast between the engraved and natural wood areas.
Compatible with CO₂ laser systems, these blanks are perfect for personalized gifts, jewelry, home décor, and maker projects. The wood grain adds unique character to every piece.
Specifications
Material
Wood (MDF, Baltic birch, or hardwood)
Laser Type
CO₂ laser systems
Finish
Natural / unfinished
Supplier
Monarch Pine
Price
$11.50
✅ Use Cases
- Personalized ornaments & keepsakes
- Custom jewelry & earrings
- Engraved signage & décor
- Wedding & event favors
- Maker craft projects
🔥 Engraving Tips
- Use masking tape to prevent smoke staining around the engraving
- Lower speed and higher power for deeper engravings
- Sand lightly after engraving to remove char residue
- Apply a finish coat to seal and protect the engraving
- Test on scrap wood first to dial in your settings
1/8″ Microply Alder from Monarch Pine. 1/8″ Microply Alder from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
WOOD BLANK
1/8″ Microply Alder
1/8″ Microply Alder from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
Overview
1/8″ Microply Alder is crafted from quality wood material, offering a natural and warm aesthetic for custom engravings. The surface takes laser engraving cleanly, producing sharp contrast between the engraved and natural wood areas.
Compatible with CO₂ laser systems, these blanks are perfect for personalized gifts, jewelry, home décor, and maker projects. The wood grain adds unique character to every piece.
Specifications
Material
Wood (MDF, Baltic birch, or hardwood)
Laser Type
CO₂ laser systems
Finish
Natural / unfinished
Supplier
Monarch Pine
Price
$9.50
✅ Use Cases
- Personalized ornaments & keepsakes
- Custom jewelry & earrings
- Engraved signage & décor
- Wedding & event favors
- Maker craft projects
🔥 Engraving Tips
- Use masking tape to prevent smoke staining around the engraving
- Lower speed and higher power for deeper engravings
- Sand lightly after engraving to remove char residue
- Apply a finish coat to seal and protect the engraving
- Test on scrap wood first to dial in your settings
1/8″ Microply Aromatic Cedar from Monarch Pine. 1/8″ Microply Aromatic Cedar from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
WOOD BLANK
1/8″ Microply Aromatic Cedar
1/8″ Microply Aromatic Cedar from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
Overview
1/8″ Microply Aromatic Cedar is crafted from quality wood material, offering a natural and warm aesthetic for custom engravings. The surface takes laser engraving cleanly, producing sharp contrast between the engraved and natural wood areas.
Compatible with CO₂ laser systems, these blanks are perfect for personalized gifts, jewelry, home décor, and maker projects. The wood grain adds unique character to every piece.
Specifications
Material
Wood (MDF, Baltic birch, or hardwood)
Laser Type
CO₂ laser systems
Finish
Natural / unfinished
Supplier
Monarch Pine
Price
$11.50
✅ Use Cases
- Personalized ornaments & keepsakes
- Custom jewelry & earrings
- Engraved signage & décor
- Wedding & event favors
- Maker craft projects
🔥 Engraving Tips
- Use masking tape to prevent smoke staining around the engraving
- Lower speed and higher power for deeper engravings
- Sand lightly after engraving to remove char residue
- Apply a finish coat to seal and protect the engraving
- Test on scrap wood first to dial in your settings
1/8″ Microply Birch from Monarch Pine. 1/8″ Microply Birch from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
WOOD BLANK
1/8″ Microply Birch
1/8″ Microply Birch from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
Overview
1/8″ Microply Birch is crafted from quality wood material, offering a natural and warm aesthetic for custom engravings. The surface takes laser engraving cleanly, producing sharp contrast between the engraved and natural wood areas.
Compatible with CO₂ laser systems, these blanks are perfect for personalized gifts, jewelry, home décor, and maker projects. The wood grain adds unique character to every piece.
Specifications
Material
Wood (MDF, Baltic birch, or hardwood)
Laser Type
CO₂ laser systems
Finish
Natural / unfinished
Supplier
Monarch Pine
Price
$7.00
✅ Use Cases
- Personalized ornaments & keepsakes
- Custom jewelry & earrings
- Engraved signage & décor
- Wedding & event favors
- Maker craft projects
🔥 Engraving Tips
- Use masking tape to prevent smoke staining around the engraving
- Lower speed and higher power for deeper engravings
- Sand lightly after engraving to remove char residue
- Apply a finish coat to seal and protect the engraving
- Test on scrap wood first to dial in your settings
1/8″ Microply Birch (Pack Of 20) from Monarch Pine. 1/8″ Microply Birch (Pack Of 20) from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
WOOD BLANK
1/8″ Microply Birch (Pack Of 20)
1/8″ Microply Birch (Pack Of 20) from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
Overview
1/8″ Microply Birch (Pack Of 20) is crafted from quality wood material, offering a natural and warm aesthetic for custom engravings. The surface takes laser engraving cleanly, producing sharp contrast between the engraved and natural wood areas.
Compatible with CO₂ laser systems, these blanks are perfect for personalized gifts, jewelry, home décor, and maker projects. The wood grain adds unique character to every piece.
Specifications
Material
Wood (MDF, Baltic birch, or hardwood)
Laser Type
CO₂ laser systems
Finish
Natural / unfinished
Supplier
Monarch Pine
Price
$125.00
✅ Use Cases
- Personalized ornaments & keepsakes
- Custom jewelry & earrings
- Engraved signage & décor
- Wedding & event favors
- Maker craft projects
🔥 Engraving Tips
- Use masking tape to prevent smoke staining around the engraving
- Lower speed and higher power for deeper engravings
- Sand lightly after engraving to remove char residue
- Apply a finish coat to seal and protect the engraving
- Test on scrap wood first to dial in your settings
1/8″ Microply Cherry from Monarch Pine. 1/8″ Microply Cherry from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
WOOD BLANK
1/8″ Microply Cherry
1/8″ Microply Cherry from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
Overview
1/8″ Microply Cherry is crafted from quality wood material, offering a natural and warm aesthetic for custom engravings. The surface takes laser engraving cleanly, producing sharp contrast between the engraved and natural wood areas.
Compatible with CO₂ laser systems, these blanks are perfect for personalized gifts, jewelry, home décor, and maker projects. The wood grain adds unique character to every piece.
Specifications
Material
Wood (MDF, Baltic birch, or hardwood)
Laser Type
CO₂ laser systems
Finish
Natural / unfinished
Supplier
Monarch Pine
Price
$10.00
✅ Use Cases
- Personalized ornaments & keepsakes
- Custom jewelry & earrings
- Engraved signage & décor
- Wedding & event favors
- Maker craft projects
🔥 Engraving Tips
- Use masking tape to prevent smoke staining around the engraving
- Lower speed and higher power for deeper engravings
- Sand lightly after engraving to remove char residue
- Apply a finish coat to seal and protect the engraving
- Test on scrap wood first to dial in your settings
1/8″ Microply Hickory from Monarch Pine. 1/8″ Microply Hickory from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
WOOD BLANK
1/8″ Microply Hickory
1/8″ Microply Hickory from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
Overview
1/8″ Microply Hickory is crafted from quality wood material, offering a natural and warm aesthetic for custom engravings. The surface takes laser engraving cleanly, producing sharp contrast between the engraved and natural wood areas.
Compatible with CO₂ laser systems, these blanks are perfect for personalized gifts, jewelry, home décor, and maker projects. The wood grain adds unique character to every piece.
Specifications
Material
Wood (MDF, Baltic birch, or hardwood)
Laser Type
CO₂ laser systems
Finish
Natural / unfinished
Supplier
Monarch Pine
Price
$10.00
✅ Use Cases
- Personalized ornaments & keepsakes
- Custom jewelry & earrings
- Engraved signage & décor
- Wedding & event favors
- Maker craft projects
🔥 Engraving Tips
- Use masking tape to prevent smoke staining around the engraving
- Lower speed and higher power for deeper engravings
- Sand lightly after engraving to remove char residue
- Apply a finish coat to seal and protect the engraving
- Test on scrap wood first to dial in your settings
1/8″ Microply Mahogany from Monarch Pine. 1/8″ Microply Mahogany from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
WOOD BLANK
1/8″ Microply Mahogany
1/8″ Microply Mahogany from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
Overview
1/8″ Microply Mahogany is crafted from quality wood material, offering a natural and warm aesthetic for custom engravings. The surface takes laser engraving cleanly, producing sharp contrast between the engraved and natural wood areas.
Compatible with CO₂ laser systems, these blanks are perfect for personalized gifts, jewelry, home décor, and maker projects. The wood grain adds unique character to every piece.
Specifications
Material
Wood (MDF, Baltic birch, or hardwood)
Laser Type
CO₂ laser systems
Finish
Natural / unfinished
Supplier
Monarch Pine
Price
$12.00
✅ Use Cases
- Personalized ornaments & keepsakes
- Custom jewelry & earrings
- Engraved signage & décor
- Wedding & event favors
- Maker craft projects
🔥 Engraving Tips
- Use masking tape to prevent smoke staining around the engraving
- Lower speed and higher power for deeper engravings
- Sand lightly after engraving to remove char residue
- Apply a finish coat to seal and protect the engraving
- Test on scrap wood first to dial in your settings
1/8″ Microply Maple from Monarch Pine. 1/8″ Microply Maple from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
WOOD BLANK
1/8″ Microply Maple
1/8″ Microply Maple from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
Overview
1/8″ Microply Maple is crafted from quality wood material, offering a natural and warm aesthetic for custom engravings. The surface takes laser engraving cleanly, producing sharp contrast between the engraved and natural wood areas.
Compatible with CO₂ laser systems, these blanks are perfect for personalized gifts, jewelry, home décor, and maker projects. The wood grain adds unique character to every piece.
Specifications
Material
Wood (MDF, Baltic birch, or hardwood)
Laser Type
CO₂ laser systems
Finish
Natural / unfinished
Supplier
Monarch Pine
Price
$10.00
✅ Use Cases
- Personalized ornaments & keepsakes
- Custom jewelry & earrings
- Engraved signage & décor
- Wedding & event favors
- Maker craft projects
🔥 Engraving Tips
- Use masking tape to prevent smoke staining around the engraving
- Lower speed and higher power for deeper engravings
- Sand lightly after engraving to remove char residue
- Apply a finish coat to seal and protect the engraving
- Test on scrap wood first to dial in your settings
1/8″ Microply Red Oak from Monarch Pine. 1/8″ Microply Red Oak from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
WOOD BLANK
1/8″ Microply Red Oak
1/8″ Microply Red Oak from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
Overview
1/8″ Microply Red Oak is crafted from quality wood material, offering a natural and warm aesthetic for custom engravings. The surface takes laser engraving cleanly, producing sharp contrast between the engraved and natural wood areas.
Compatible with CO₂ laser systems, these blanks are perfect for personalized gifts, jewelry, home décor, and maker projects. The wood grain adds unique character to every piece.
Specifications
Material
Wood (MDF, Baltic birch, or hardwood)
Laser Type
CO₂ laser systems
Finish
Natural / unfinished
Supplier
Monarch Pine
Price
$10.00
✅ Use Cases
- Personalized ornaments & keepsakes
- Custom jewelry & earrings
- Engraved signage & décor
- Wedding & event favors
- Maker craft projects
🔥 Engraving Tips
- Use masking tape to prevent smoke staining around the engraving
- Lower speed and higher power for deeper engravings
- Sand lightly after engraving to remove char residue
- Apply a finish coat to seal and protect the engraving
- Test on scrap wood first to dial in your settings
1/8″ Microply Sample Pack! from Monarch Pine. 1/8″ Microply Sample Pack! from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
WOOD BLANK
1/8″ Microply Sample Pack!
1/8″ Microply Sample Pack! from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
Overview
1/8″ Microply Sample Pack! is crafted from quality wood material, offering a natural and warm aesthetic for custom engravings. The surface takes laser engraving cleanly, producing sharp contrast between the engraved and natural wood areas.
Compatible with CO₂ laser systems, these blanks are perfect for personalized gifts, jewelry, home décor, and maker projects. The wood grain adds unique character to every piece.
Specifications
Material
Wood (MDF, Baltic birch, or hardwood)
Laser Type
CO₂ laser systems
Finish
Natural / unfinished
Supplier
Monarch Pine
Price
$80.00
✅ Use Cases
- Personalized ornaments & keepsakes
- Custom jewelry & earrings
- Engraved signage & décor
- Wedding & event favors
- Maker craft projects
🔥 Engraving Tips
- Use masking tape to prevent smoke staining around the engraving
- Lower speed and higher power for deeper engravings
- Sand lightly after engraving to remove char residue
- Apply a finish coat to seal and protect the engraving
- Test on scrap wood first to dial in your settings
1/8″ Microply Sapele from Monarch Pine. 1/8″ Microply Sapele from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
WOOD BLANK
1/8″ Microply Sapele
1/8″ Microply Sapele from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
Overview
1/8″ Microply Sapele is crafted from quality wood material, offering a natural and warm aesthetic for custom engravings. The surface takes laser engraving cleanly, producing sharp contrast between the engraved and natural wood areas.
Compatible with CO₂ laser systems, these blanks are perfect for personalized gifts, jewelry, home décor, and maker projects. The wood grain adds unique character to every piece.
Specifications
Material
Wood (MDF, Baltic birch, or hardwood)
Laser Type
CO₂ laser systems
Finish
Natural / unfinished
Supplier
Monarch Pine
Price
$12.50
✅ Use Cases
- Personalized ornaments & keepsakes
- Custom jewelry & earrings
- Engraved signage & décor
- Wedding & event favors
- Maker craft projects
🔥 Engraving Tips
- Use masking tape to prevent smoke staining around the engraving
- Lower speed and higher power for deeper engravings
- Sand lightly after engraving to remove char residue
- Apply a finish coat to seal and protect the engraving
- Test on scrap wood first to dial in your settings
1/8″ Microply Walnut from Monarch Pine. 1/8″ Microply Walnut from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
WOOD BLANK
1/8″ Microply Walnut
1/8″ Microply Walnut from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
Overview
1/8″ Microply Walnut is crafted from quality wood material, offering a natural and warm aesthetic for custom engravings. The surface takes laser engraving cleanly, producing sharp contrast between the engraved and natural wood areas.
Compatible with CO₂ laser systems, these blanks are perfect for personalized gifts, jewelry, home décor, and maker projects. The wood grain adds unique character to every piece.
Specifications
Material
Wood (MDF, Baltic birch, or hardwood)
Laser Type
CO₂ laser systems
Finish
Natural / unfinished
Supplier
Monarch Pine
Price
$11.00
✅ Use Cases
- Personalized ornaments & keepsakes
- Custom jewelry & earrings
- Engraved signage & décor
- Wedding & event favors
- Maker craft projects
🔥 Engraving Tips
- Use masking tape to prevent smoke staining around the engraving
- Lower speed and higher power for deeper engravings
- Sand lightly after engraving to remove char residue
- Apply a finish coat to seal and protect the engraving
- Test on scrap wood first to dial in your settings
1/8″ Microply White Birch from Monarch Pine. 1/8″ Microply White Birch from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
WOOD BLANK
1/8″ Microply White Birch
1/8″ Microply White Birch from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
Overview
1/8″ Microply White Birch is crafted from quality wood material, offering a natural and warm aesthetic for custom engravings. The surface takes laser engraving cleanly, producing sharp contrast between the engraved and natural wood areas.
Compatible with CO₂ laser systems, these blanks are perfect for personalized gifts, jewelry, home décor, and maker projects. The wood grain adds unique character to every piece.
Specifications
Material
Wood (MDF, Baltic birch, or hardwood)
Laser Type
CO₂ laser systems
Finish
Natural / unfinished
Supplier
Monarch Pine
Price
$9.50
✅ Use Cases
- Personalized ornaments & keepsakes
- Custom jewelry & earrings
- Engraved signage & décor
- Wedding & event favors
- Maker craft projects
🔥 Engraving Tips
- Use masking tape to prevent smoke staining around the engraving
- Lower speed and higher power for deeper engravings
- Sand lightly after engraving to remove char residue
- Apply a finish coat to seal and protect the engraving
- Test on scrap wood first to dial in your settings
1/8″ Microply White Oak from Monarch Pine. 1/8″ Microply White Oak from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
WOOD BLANK
1/8″ Microply White Oak
1/8″ Microply White Oak from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
Overview
1/8″ Microply White Oak is crafted from quality wood material, offering a natural and warm aesthetic for custom engravings. The surface takes laser engraving cleanly, producing sharp contrast between the engraved and natural wood areas.
Compatible with CO₂ laser systems, these blanks are perfect for personalized gifts, jewelry, home décor, and maker projects. The wood grain adds unique character to every piece.
Specifications
Material
Wood (MDF, Baltic birch, or hardwood)
Laser Type
CO₂ laser systems
Finish
Natural / unfinished
Supplier
Monarch Pine
Price
$10.00
✅ Use Cases
- Personalized ornaments & keepsakes
- Custom jewelry & earrings
- Engraved signage & décor
- Wedding & event favors
- Maker craft projects
🔥 Engraving Tips
- Use masking tape to prevent smoke staining around the engraving
- Lower speed and higher power for deeper engravings
- Sand lightly after engraving to remove char residue
- Apply a finish coat to seal and protect the engraving
- Test on scrap wood first to dial in your settings
Microply Pack of 18 (Includes 6 Cherry, 6 Maple, 6 Walnut) from Monarch Pine. Microply Pack of 18 (Includes 6 Cherry, 6 Maple, 6 Walnut) from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
WOOD BLANK
Microply Pack of 18 (Includes 6 Cherry, 6 Maple, 6 Walnut)
Microply Pack of 18 (Includes 6 Cherry, 6 Maple, 6 Walnut) from Monarch Pine — a premium wood blank designed for laser engraving, cutting, and personalization.
Overview
Microply Pack of 18 (Includes 6 Cherry, 6 Maple, 6 Walnut) is crafted from quality wood material, offering a natural and warm aesthetic for custom engravings. The surface takes laser engraving cleanly, producing sharp contrast between the engraved and natural wood areas.
Compatible with CO₂ laser systems, these blanks are perfect for personalized gifts, jewelry, home décor, and maker projects. The wood grain adds unique character to every piece.
Specifications
Material
Wood (MDF, Baltic birch, or hardwood)
Laser Type
CO₂ laser systems
Finish
Natural / unfinished
Supplier
Monarch Pine
Price
$170.00
✅ Use Cases
- Personalized ornaments & keepsakes
- Custom jewelry & earrings
- Engraved signage & décor
- Wedding & event favors
- Maker craft projects
🔥 Engraving Tips
- Use masking tape to prevent smoke staining around the engraving
- Lower speed and higher power for deeper engravings
- Sand lightly after engraving to remove char residue
- Apply a finish coat to seal and protect the engraving
- Test on scrap wood first to dial in your settings
SOURCE & VENDOR
Monarch Pine
https://monarchpine.com/products/microply-pack-of-18-includes-6-cherry-6-maple-6-walnut