Monarch Pine Charms & Pendants
64 products
Crescent Moon & Pearlescent White Circle Stainless Steel Charm (Silver or Gold), 10 Pieces, Charm #8
Crescent Moon & Pearlescent White Circle Stainless Steel Charm (Silver or Gold), 10 Pieces, Charm #8…
Fluted Heart GOLD 1-Hole Brass Charms, 10 pcs, Charm #47
Fluted Heart GOLD 1-Hole Brass Charms, 10 pcs, Charm #47 from Monarch Pine. Fluted Heart GOLD…
Fluted Heart Silver 1-Hole Brass Charms, 10 Pieces, Charm #46
Fluted Heart Silver 1-Hole Brass Charms, 10 Pieces, Charm #46 from Monarch Pine. Fluted Heart Silver…
Gold & Maroon Coffin Enamel and Alloy Pendant Charm, 10 Pieces, Charm #11
Gold & Maroon Coffin Enamel and Alloy Pendant Charm, 10 Pieces, Charm #11 from Monarch Pine.…
Gold 10mm Stainless Steel Charm Bezels, 10 Pieces, Charm #48
Gold 10mm Stainless Steel Charm Bezels, 10 Pieces, Charm #48 from Monarch Pine. Gold 10mm Stainless…
Gold 12mm Stainless Steel Charm Bezels, 10 Pieces, Charm #51
Gold 12mm Stainless Steel Charm Bezels, 10 Pieces, Charm #51 from Monarch Pine. Gold 12mm Stainless…
Gold 12mm Stainless Steel Charm Connector (Double Loop), 10 Pieces, Connector #44
Gold 12mm Stainless Steel Charm Connector (Double Loop), 10 Pieces, Connector #44 from Monarch Pine. Gold…
Gold and White Snowflake Enamel and Alloy Pendant Charm, 10 Pieces, Charm #22
Gold and White Snowflake Enamel and Alloy Pendant Charm, 10 Pieces, Charm #22 from Monarch Pine.…
Gold Bohemian 1-Hole Brushed Brass Charms, 10 Pieces, Charm #98
Gold Bohemian 1-Hole Brushed Brass Charms, 10 Pieces, Charm #98 from Monarch Pine. Gold Bohemian 1-Hole…
Gold Brass Large 2-Hole Sunburst Connector, 10 Pieces, Connector #50
Gold Brass Large 2-Hole Sunburst Connector, 10 Pieces, Connector #50 from Monarch Pine. Gold Brass Large…
Gold Brass Moon Phase Pendant, 10 Pieces, Charm #94
Gold Brass Moon Phase Pendant, 10 Pieces, Charm #94 from Monarch Pine. Gold Brass Moon Phase…
Gold Brass Triple Chain Pendant, 10 Pieces (3 Strands Per Piece), Charm #82
Gold Brass Triple Chain Pendant, 10 Pieces (3 Strands Per Piece), Charm #82 from Monarch Pine.…
Gold Brass Two-Chain Connector With Loops, 10 Pieces, Connector #3
Gold Brass Two-Chain Connector With Loops, 10 Pieces, Connector #3 from Monarch Pine. Gold Brass Two-Chain…
Gold Brushed Brass Open Rectangle Charms, 10 Pieces, Charm #109
Gold Brushed Brass Open Rectangle Charms, 10 Pieces, Charm #109 from Monarch Pine. Gold Brushed Brass…
Gold Brushed Brass Tiny Teardrop Charms, 10 Pieces, Charm #102
Gold Brushed Brass Tiny Teardrop Charms, 10 Pieces, Charm #102 from Monarch Pine. Gold Brushed Brass…
Gold Brushed Diamond Brass Charms, 10 Pieces, Charm #105
Gold Brushed Diamond Brass Charms, 10 Pieces, Charm #105 from Monarch Pine. Gold Brushed Diamond Brass…
Gold Daisy 1-Hole Brass Charms, 10 Pieces, Charm #110
Gold Daisy 1-Hole Brass Charms, 10 Pieces, Charm #110 from Monarch Pine. Gold Daisy 1-Hole Brass…
Gold Elongated Narrow Triangle 1-Hole Brass Charms, 10 Pieces, Charm #91
Gold Elongated Narrow Triangle 1-Hole Brass Charms, 10 Pieces, Charm #91 from Monarch Pine. Gold Elongated…
Gold Fall Leaf 1-Hole Brass Charms, 10 Pieces
Gold Fall Leaf 1-Hole Brass Charms, 10 Pieces from Monarch Pine. Gold Fall Leaf 1-Hole Brass…
Gold Petal Charms (Brushed Brass), 10 Pieces, Charm #89
Gold Petal Charms (Brushed Brass), 10 Pieces, Charm #89 from Monarch Pine. Gold Petal Charms (Brushed…
Gold Ray Semicircle 1-Hole Brushed Brass Pendant, 10 Pieces, Charm #92
Gold Ray Semicircle 1-Hole Brushed Brass Pendant, 10 Pieces, Charm #92 from Monarch Pine. Gold Ray…
Gold Rounded Trapezoid 2-Hole Hammered Brass Connectors, 10 Pieces, Connector #55
Gold Rounded Trapezoid 2-Hole Hammered Brass Connectors, 10 Pieces, Connector #55 from Monarch Pine. Gold Rounded…
Gold Split Circle 1-Hole Brushed Brass Pendant, 10 Pieces, Charm #52
Gold Split Circle 1-Hole Brushed Brass Pendant, 10 Pieces, Charm #52 from Monarch Pine. Gold Split…
Hollow Heart GOLD Brass Charms, 10 pcs, Charm #64
Hollow Heart GOLD Brass Charms, 10 pcs, Charm #64 from Monarch Pine. Hollow Heart GOLD Brass…
Hollow Heart SILVER Brass Charms, 10 pcs, Charm #72
Hollow Heart SILVER Brass Charms, 10 pcs, Charm #72 from Monarch Pine. Hollow Heart SILVER Brass…
Jack-O-Lantern Orange, Yellow, & Gold Enamel and Alloy Charm, 10 Pieces, Charm #19
Jack-O-Lantern Orange, Yellow, & Gold Enamel and Alloy Charm, 10 Pieces, Charm #19 from Monarch Pine.…
Medium Cowboy Boot Stainless Steel Pendant (Silver or Gold), 10 Pieces, Charm #3
Medium Cowboy Boot Stainless Steel Pendant (Silver or Gold), 10 Pieces, Charm #3 from Monarch Pine.…
Medium Rectangle Sunburst Stainless Steel Charm (Silver or Gold), 10 Pieces, Charm #5
Medium Rectangle Sunburst Stainless Steel Charm (Silver or Gold), 10 Pieces, Charm #5 from Monarch Pine.…
Pearlescent White Circle Stainless Steel Charm (Silver or Gold), 10 Pieces, Charm #7
Pearlescent White Circle Stainless Steel Charm (Silver or Gold), 10 Pieces, Charm #7 from Monarch Pine.…
Petite Gold Brass Flower Center (6mm Stamen, No Hole), 10 Pieces, Charm #59
Petite Gold Brass Flower Center (6mm Stamen, No Hole), 10 Pieces, Charm #59 from Monarch Pine.…
Petite Leaf Stainless Steel Charm (Choice of Silver or Gold), 20 Pieces, Charm #54
Petite Leaf Stainless Steel Charm (Choice of Silver or Gold), 20 Pieces, Charm #54 from Monarch…
Petite Red Apple Gold-Plated Enamel Charms, 10 Pieces, Charm #16
Petite Red Apple Gold-Plated Enamel Charms, 10 Pieces, Charm #16 from Monarch Pine. Petite Red Apple…
Petite Red Cherry Gold-Plated Enamel Charms, 10 Pieces, Charm #17
Petite Red Cherry Gold-Plated Enamel Charms, 10 Pieces, Charm #17 from Monarch Pine. Petite Red Cherry…
Petite Silver Brass Flower Center (6mm Stamen, No Hole), 10 Pieces, Charm #60
Petite Silver Brass Flower Center (6mm Stamen, No Hole), 10 Pieces, Charm #60 from Monarch Pine.…
Petite White Butterfly Gold-Plated Enamel Charms, 10 Pieces, Charm #18
Petite White Butterfly Gold-Plated Enamel Charms, 10 Pieces, Charm #18 from Monarch Pine. Petite White Butterfly…
Petite White Star Gold-Plated Enamel Charms, 10 Pieces
Petite White Star Gold-Plated Enamel Charms, 10 Pieces from Monarch Pine. Petite White Star Gold-Plated Enamel…
Petite White/Yellow Daisy Gold-Plated Enamel Charms, 10 Pieces, Charm #13
Petite White/Yellow Daisy Gold-Plated Enamel Charms, 10 Pieces, Charm #13 from Monarch Pine. Petite White/Yellow Daisy…
Pink Happy Face Enamel and Alloy Pendant Charm, 10 Pieces
Pink Happy Face Enamel and Alloy Pendant Charm, 10 Pieces from Monarch Pine. Pink Happy Face…
Pumpkin (Orange and Gold) Enamel and Alloy Pendant Charm, 10 Pieces, Charm #14
Pumpkin (Orange and Gold) Enamel and Alloy Pendant Charm, 10 Pieces, Charm #14 from Monarch Pine.…
Regular Gold Brass Flower Center (12mm Stamen, No Hole), 10 Pieces, Charm #57
Regular Gold Brass Flower Center (12mm Stamen, No Hole), 10 Pieces, Charm #57 from Monarch Pine.…
Regular Silver Brass Flower Center (12mm Stamen, No Hole), 10 Pieces, Charm #58
Regular Silver Brass Flower Center (12mm Stamen, No Hole), 10 Pieces, Charm #58 from Monarch Pine.…
Regular Three Feather Brass Charms, 10 Pieces, Charm #93
Regular Three Feather Brass Charms, 10 Pieces, Charm #93 from Monarch Pine. Regular Three Feather Brass…
Silver & Maroon Coffin Enamel and Alloy Pendant Charm, 10 Pieces, Charm #12
Silver & Maroon Coffin Enamel and Alloy Pendant Charm, 10 Pieces, Charm #12 from Monarch Pine.…
Silver 10mm Stainless Steel Charm Bezels, 10 Pieces, Charm #49
Silver 10mm Stainless Steel Charm Bezels, 10 Pieces, Charm #49 from Monarch Pine. Silver 10mm Stainless…
Silver 12mm Stainless Steel Charm Bezels, 10 Pieces, Charm #50
Silver 12mm Stainless Steel Charm Bezels, 10 Pieces, Charm #50 from Monarch Pine. Silver 12mm Stainless…
Silver 12mm Stainless Steel Charm Connector (Double Loop), 10 Pieces, Connector #45
Silver 12mm Stainless Steel Charm Connector (Double Loop), 10 Pieces, Connector #45 from Monarch Pine. Silver…
Silver and White Snowflake Enamel and Alloy Pendant Charm, 10 Pieces, Charm #23
Silver and White Snowflake Enamel and Alloy Pendant Charm, 10 Pieces, Charm #23 from Monarch Pine.…
Silver Brass Moon Phase Pendant, 10 Pieces, Charm #95
Silver Brass Moon Phase Pendant, 10 Pieces, Charm #95 from Monarch Pine. Silver Brass Moon Phase…
Silver Brass Narrow Arch 3-Hole Arch Connectors, 10 Pieces, Connector #57
Silver Brass Narrow Arch 3-Hole Arch Connectors, 10 Pieces, Connector #57 from Monarch Pine. Silver Brass…
Silver Brass Open Hexagon 1-Hole Charm, 10 Pieces, Charm #104
Silver Brass Open Hexagon 1-Hole Charm, 10 Pieces, Charm #104 from Monarch Pine. Silver Brass Open…
Silver Brass Triple Chain Pendant, 10 Pieces, Charm #83
Silver Brass Triple Chain Pendant, 10 Pieces, Charm #83 from Monarch Pine. Silver Brass Triple Chain…
Silver Brass Two-Chain Connector With Loops, 10 Pieces, Connector #4
Silver Brass Two-Chain Connector With Loops, 10 Pieces, Connector #4 from Monarch Pine. Silver Brass Two-Chain…
Silver Brushed Brass Triangle Art Deco Charms, 10 Pieces, Charm #97
Silver Brushed Brass Triangle Art Deco Charms, 10 Pieces, Charm #97 from Monarch Pine. Silver Brushed…
Silver Daisy 1-Hole Brass Charms, 10 Pieces, Charm #111
Silver Daisy 1-Hole Brass Charms, 10 Pieces, Charm #111 from Monarch Pine. Silver Daisy 1-Hole Brass…
Silver Drama/Comedy Charms, Tragedy Masque Mardi Gras Plated Brass Charms, 10 Pieces
Silver Drama/Comedy Charms, Tragedy Masque Mardi Gras Plated Brass Charms, 10 Pieces from Monarch Pine. Silver…
Silver Medium 2-Hole Sunburst Connector, 10 Pieces, Connector #58
Silver Medium 2-Hole Sunburst Connector, 10 Pieces, Connector #58 from Monarch Pine. Silver Medium 2-Hole Sunburst…
Silver Rounded Trapezoid 2-Hole Hammered Brass Connectors, 10 Pieces, Connector #54
Silver Rounded Trapezoid 2-Hole Hammered Brass Connectors, 10 Pieces, Connector #54 from Monarch Pine. Silver Rounded…
Small Cowboy Boot Stainless Steel Charm (Silver or Gold), 10 Pieces, Charm #9
Small Cowboy Boot Stainless Steel Charm (Silver or Gold), 10 Pieces, Charm #9 from Monarch Pine.…
Small Cross Stainless Steel Charm (Silver or Gold), 10 Pieces, Charm #4
Small Cross Stainless Steel Charm (Silver or Gold), 10 Pieces, Charm #4 from Monarch Pine. Small…
Small Scallop Shell Stainless Steel Charm (Silver or Gold), 10 Pieces, Charm #1
Small Scallop Shell Stainless Steel Charm (Silver or Gold), 10 Pieces, Charm #1 from Monarch Pine.…
Sunrise Stainless Steel Pendant (Silver or Gold), 10 Pieces, Charm #2
Sunrise Stainless Steel Pendant (Silver or Gold), 10 Pieces, Charm #2 from Monarch Pine. Sunrise Stainless…
Triangle Art Deco Gold Brushed Brass Charms, 10 Pieces, Charm #96
Triangle Art Deco Gold Brushed Brass Charms, 10 Pieces, Charm #96 from Monarch Pine. Triangle Art…
Turquoise Oval Stainless Steel Charm (Silver or Gold), 10 Pieces, Charm #6
Turquoise Oval Stainless Steel Charm (Silver or Gold), 10 Pieces, Charm #6 from Monarch Pine. Turquoise…
White and Gold Ghost Enamel & Alloy Charm, 10 Pieces, Charm #15
White and Gold Ghost Enamel & Alloy Charm, 10 Pieces, Charm #15 from Monarch Pine. White…
Crescent Moon & Pearlescent White Circle Stainless Steel Charm (Silver or Gold), 10 Pieces, Charm #8 from Monarch Pine. Crescent Moon & Pearlescent White Circle Stainless Steel Charm (Silver or Gold), 10 Pieces, Charm #8 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
Crescent Moon & Pearlescent White Circle Stainless Steel Charm (Silver or Gold), 10 Pieces, Charm #8
Crescent Moon & Pearlescent White Circle Stainless Steel Charm (Silver or Gold), 10 Pieces, Charm #8 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
Crescent Moon & Pearlescent White Circle Stainless Steel Charm (Silver or Gold), 10 Pieces, Charm #8 is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$8.00
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges
Fluted Heart GOLD 1-Hole Brass Charms, 10 pcs, Charm #47 from Monarch Pine. Fluted Heart GOLD 1-Hole Brass Charms, 10 pcs, Charm #47 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
Fluted Heart GOLD 1-Hole Brass Charms, 10 pcs, Charm #47
Fluted Heart GOLD 1-Hole Brass Charms, 10 pcs, Charm #47 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
Fluted Heart GOLD 1-Hole Brass Charms, 10 pcs, Charm #47 is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$6.50
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges
Fluted Heart Silver 1-Hole Brass Charms, 10 Pieces, Charm #46 from Monarch Pine. Fluted Heart Silver 1-Hole Brass Charms, 10 Pieces, Charm #46 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
Fluted Heart Silver 1-Hole Brass Charms, 10 Pieces, Charm #46
Fluted Heart Silver 1-Hole Brass Charms, 10 Pieces, Charm #46 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
Fluted Heart Silver 1-Hole Brass Charms, 10 Pieces, Charm #46 is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$6.50
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges
Gold & Maroon Coffin Enamel and Alloy Pendant Charm, 10 Pieces, Charm #11 from Monarch Pine. Gold & Maroon Coffin Enamel and Alloy Pendant Charm, 10 Pieces, Charm #11 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
Gold & Maroon Coffin Enamel and Alloy Pendant Charm, 10 Pieces, Charm #11
Gold & Maroon Coffin Enamel and Alloy Pendant Charm, 10 Pieces, Charm #11 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
Gold & Maroon Coffin Enamel and Alloy Pendant Charm, 10 Pieces, Charm #11 is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$5.75
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges
Gold 10mm Stainless Steel Charm Bezels, 10 Pieces, Charm #48 from Monarch Pine. Gold 10mm Stainless Steel Charm Bezels, 10 Pieces, Charm #48 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
Gold 10mm Stainless Steel Charm Bezels, 10 Pieces, Charm #48
Gold 10mm Stainless Steel Charm Bezels, 10 Pieces, Charm #48 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
Gold 10mm Stainless Steel Charm Bezels, 10 Pieces, Charm #48 is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$4.50
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges
Gold 12mm Stainless Steel Charm Bezels, 10 Pieces, Charm #51 from Monarch Pine. Gold 12mm Stainless Steel Charm Bezels, 10 Pieces, Charm #51 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
Gold 12mm Stainless Steel Charm Bezels, 10 Pieces, Charm #51
Gold 12mm Stainless Steel Charm Bezels, 10 Pieces, Charm #51 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
Gold 12mm Stainless Steel Charm Bezels, 10 Pieces, Charm #51 is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$4.50
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges
Gold 12mm Stainless Steel Charm Connector (Double Loop), 10 Pieces, Connector #44 from Monarch Pine. Gold 12mm Stainless Steel Charm Connector (Double Loop), 10 Pieces, Connector #44 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
Gold 12mm Stainless Steel Charm Connector (Double Loop), 10 Pieces, Connector #44
Gold 12mm Stainless Steel Charm Connector (Double Loop), 10 Pieces, Connector #44 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
Gold 12mm Stainless Steel Charm Connector (Double Loop), 10 Pieces, Connector #44 is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$4.50
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges
Gold and White Snowflake Enamel and Alloy Pendant Charm, 10 Pieces, Charm #22 from Monarch Pine. Gold and White Snowflake Enamel and Alloy Pendant Charm, 10 Pieces, Charm #22 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
Gold and White Snowflake Enamel and Alloy Pendant Charm, 10 Pieces, Charm #22
Gold and White Snowflake Enamel and Alloy Pendant Charm, 10 Pieces, Charm #22 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
Gold and White Snowflake Enamel and Alloy Pendant Charm, 10 Pieces, Charm #22 is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$5.75
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges
Gold Bohemian 1-Hole Brushed Brass Charms, 10 Pieces, Charm #98 from Monarch Pine. Gold Bohemian 1-Hole Brushed Brass Charms, 10 Pieces, Charm #98 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
Gold Bohemian 1-Hole Brushed Brass Charms, 10 Pieces, Charm #98
Gold Bohemian 1-Hole Brushed Brass Charms, 10 Pieces, Charm #98 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
Gold Bohemian 1-Hole Brushed Brass Charms, 10 Pieces, Charm #98 is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$6.50
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges
Gold Brass Large 2-Hole Sunburst Connector, 10 Pieces, Connector #50 from Monarch Pine. Gold Brass Large 2-Hole Sunburst Connector, 10 Pieces, Connector #50 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
Gold Brass Large 2-Hole Sunburst Connector, 10 Pieces, Connector #50
Gold Brass Large 2-Hole Sunburst Connector, 10 Pieces, Connector #50 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
Gold Brass Large 2-Hole Sunburst Connector, 10 Pieces, Connector #50 is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$4.50
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges
Gold Brass Moon Phase Pendant, 10 Pieces, Charm #94 from Monarch Pine. Gold Brass Moon Phase Pendant, 10 Pieces, Charm #94 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
Gold Brass Moon Phase Pendant, 10 Pieces, Charm #94
Gold Brass Moon Phase Pendant, 10 Pieces, Charm #94 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
Gold Brass Moon Phase Pendant, 10 Pieces, Charm #94 is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$5.50
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges
Gold Brass Triple Chain Pendant, 10 Pieces (3 Strands Per Piece), Charm #82 from Monarch Pine. Gold Brass Triple Chain Pendant, 10 Pieces (3 Strands Per Piece), Charm #82 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
Gold Brass Triple Chain Pendant, 10 Pieces (3 Strands Per Piece), Charm #82
Gold Brass Triple Chain Pendant, 10 Pieces (3 Strands Per Piece), Charm #82 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
Gold Brass Triple Chain Pendant, 10 Pieces (3 Strands Per Piece), Charm #82 is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$5.50
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges
Gold Brass Two-Chain Connector With Loops, 10 Pieces, Connector #3 from Monarch Pine. Gold Brass Two-Chain Connector With Loops, 10 Pieces, Connector #3 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
Gold Brass Two-Chain Connector With Loops, 10 Pieces, Connector #3
Gold Brass Two-Chain Connector With Loops, 10 Pieces, Connector #3 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
Gold Brass Two-Chain Connector With Loops, 10 Pieces, Connector #3 is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$6.50
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges
Gold Brushed Brass Open Rectangle Charms, 10 Pieces, Charm #109 from Monarch Pine. Gold Brushed Brass Open Rectangle Charms, 10 Pieces, Charm #109 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
Gold Brushed Brass Open Rectangle Charms, 10 Pieces, Charm #109
Gold Brushed Brass Open Rectangle Charms, 10 Pieces, Charm #109 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
Gold Brushed Brass Open Rectangle Charms, 10 Pieces, Charm #109 is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$5.00
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges
Gold Brushed Brass Tiny Teardrop Charms, 10 Pieces, Charm #102 from Monarch Pine. Gold Brushed Brass Tiny Teardrop Charms, 10 Pieces, Charm #102 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
Gold Brushed Brass Tiny Teardrop Charms, 10 Pieces, Charm #102
Gold Brushed Brass Tiny Teardrop Charms, 10 Pieces, Charm #102 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
Gold Brushed Brass Tiny Teardrop Charms, 10 Pieces, Charm #102 is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$4.00
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges
Gold Brushed Diamond Brass Charms, 10 Pieces, Charm #105 from Monarch Pine. Gold Brushed Diamond Brass Charms, 10 Pieces, Charm #105 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
Gold Brushed Diamond Brass Charms, 10 Pieces, Charm #105
Gold Brushed Diamond Brass Charms, 10 Pieces, Charm #105 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
Gold Brushed Diamond Brass Charms, 10 Pieces, Charm #105 is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$4.50
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges
Gold Daisy 1-Hole Brass Charms, 10 Pieces, Charm #110 from Monarch Pine. Gold Daisy 1-Hole Brass Charms, 10 Pieces, Charm #110 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
Gold Daisy 1-Hole Brass Charms, 10 Pieces, Charm #110
Gold Daisy 1-Hole Brass Charms, 10 Pieces, Charm #110 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
Gold Daisy 1-Hole Brass Charms, 10 Pieces, Charm #110 is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$6.50
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges
Gold Elongated Narrow Triangle 1-Hole Brass Charms, 10 Pieces, Charm #91 from Monarch Pine. Gold Elongated Narrow Triangle 1-Hole Brass Charms, 10 Pieces, Charm #91 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
Gold Elongated Narrow Triangle 1-Hole Brass Charms, 10 Pieces, Charm #91
Gold Elongated Narrow Triangle 1-Hole Brass Charms, 10 Pieces, Charm #91 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
Gold Elongated Narrow Triangle 1-Hole Brass Charms, 10 Pieces, Charm #91 is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$5.50
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges
Gold Fall Leaf 1-Hole Brass Charms, 10 Pieces from Monarch Pine. Gold Fall Leaf 1-Hole Brass Charms, 10 Pieces from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
Gold Fall Leaf 1-Hole Brass Charms, 10 Pieces
Gold Fall Leaf 1-Hole Brass Charms, 10 Pieces from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
Gold Fall Leaf 1-Hole Brass Charms, 10 Pieces is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$6.50
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges
Gold Petal Charms (Brushed Brass), 10 Pieces, Charm #89 from Monarch Pine. Gold Petal Charms (Brushed Brass), 10 Pieces, Charm #89 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
Gold Petal Charms (Brushed Brass), 10 Pieces, Charm #89
Gold Petal Charms (Brushed Brass), 10 Pieces, Charm #89 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
Gold Petal Charms (Brushed Brass), 10 Pieces, Charm #89 is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$4.50
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges
Gold Ray Semicircle 1-Hole Brushed Brass Pendant, 10 Pieces, Charm #92 from Monarch Pine. Gold Ray Semicircle 1-Hole Brushed Brass Pendant, 10 Pieces, Charm #92 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
Gold Ray Semicircle 1-Hole Brushed Brass Pendant, 10 Pieces, Charm #92
Gold Ray Semicircle 1-Hole Brushed Brass Pendant, 10 Pieces, Charm #92 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
Gold Ray Semicircle 1-Hole Brushed Brass Pendant, 10 Pieces, Charm #92 is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$4.50
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges
Gold Rounded Trapezoid 2-Hole Hammered Brass Connectors, 10 Pieces, Connector #55 from Monarch Pine. Gold Rounded Trapezoid 2-Hole Hammered Brass Connectors, 10 Pieces, Connector #55 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
Gold Rounded Trapezoid 2-Hole Hammered Brass Connectors, 10 Pieces, Connector #55
Gold Rounded Trapezoid 2-Hole Hammered Brass Connectors, 10 Pieces, Connector #55 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
Gold Rounded Trapezoid 2-Hole Hammered Brass Connectors, 10 Pieces, Connector #55 is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$5.00
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges
Gold Split Circle 1-Hole Brushed Brass Pendant, 10 Pieces, Charm #52 from Monarch Pine. Gold Split Circle 1-Hole Brushed Brass Pendant, 10 Pieces, Charm #52 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
Gold Split Circle 1-Hole Brushed Brass Pendant, 10 Pieces, Charm #52
Gold Split Circle 1-Hole Brushed Brass Pendant, 10 Pieces, Charm #52 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
Gold Split Circle 1-Hole Brushed Brass Pendant, 10 Pieces, Charm #52 is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$6.50
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges
Hollow Heart GOLD Brass Charms, 10 pcs, Charm #64 from Monarch Pine. Hollow Heart GOLD Brass Charms, 10 pcs, Charm #64 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
Hollow Heart GOLD Brass Charms, 10 pcs, Charm #64
Hollow Heart GOLD Brass Charms, 10 pcs, Charm #64 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
Hollow Heart GOLD Brass Charms, 10 pcs, Charm #64 is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$6.00
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges
Hollow Heart SILVER Brass Charms, 10 pcs, Charm #72 from Monarch Pine. Hollow Heart SILVER Brass Charms, 10 pcs, Charm #72 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
Hollow Heart SILVER Brass Charms, 10 pcs, Charm #72
Hollow Heart SILVER Brass Charms, 10 pcs, Charm #72 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
Hollow Heart SILVER Brass Charms, 10 pcs, Charm #72 is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$6.00
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges
Jack-O-Lantern Orange, Yellow, & Gold Enamel and Alloy Charm, 10 Pieces, Charm #19 from Monarch Pine. Jack-O-Lantern Orange, Yellow, & Gold Enamel and Alloy Charm, 10 Pieces, Charm #19 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
Jack-O-Lantern Orange, Yellow, & Gold Enamel and Alloy Charm, 10 Pieces, Charm #19
Jack-O-Lantern Orange, Yellow, & Gold Enamel and Alloy Charm, 10 Pieces, Charm #19 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
Jack-O-Lantern Orange, Yellow, & Gold Enamel and Alloy Charm, 10 Pieces, Charm #19 is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$5.75
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges
Medium Cowboy Boot Stainless Steel Pendant (Silver or Gold), 10 Pieces, Charm #3 from Monarch Pine. Medium Cowboy Boot Stainless Steel Pendant (Silver or Gold), 10 Pieces, Charm #3 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
Medium Cowboy Boot Stainless Steel Pendant (Silver or Gold), 10 Pieces, Charm #3
Medium Cowboy Boot Stainless Steel Pendant (Silver or Gold), 10 Pieces, Charm #3 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
Medium Cowboy Boot Stainless Steel Pendant (Silver or Gold), 10 Pieces, Charm #3 is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$8.00
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges
SOURCE & VENDOR
Monarch Pine
Medium Rectangle Sunburst Stainless Steel Charm (Silver or Gold), 10 Pieces, Charm #5 from Monarch Pine. Medium Rectangle Sunburst Stainless Steel Charm (Silver or Gold), 10 Pieces, Charm #5 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
Medium Rectangle Sunburst Stainless Steel Charm (Silver or Gold), 10 Pieces, Charm #5
Medium Rectangle Sunburst Stainless Steel Charm (Silver or Gold), 10 Pieces, Charm #5 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
Medium Rectangle Sunburst Stainless Steel Charm (Silver or Gold), 10 Pieces, Charm #5 is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$8.00
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges
SOURCE & VENDOR
Monarch Pine
Pearlescent White Circle Stainless Steel Charm (Silver or Gold), 10 Pieces, Charm #7 from Monarch Pine. Pearlescent White Circle Stainless Steel Charm (Silver or Gold), 10 Pieces, Charm #7 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
Pearlescent White Circle Stainless Steel Charm (Silver or Gold), 10 Pieces, Charm #7
Pearlescent White Circle Stainless Steel Charm (Silver or Gold), 10 Pieces, Charm #7 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
Pearlescent White Circle Stainless Steel Charm (Silver or Gold), 10 Pieces, Charm #7 is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$8.00
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges
SOURCE & VENDOR
Monarch Pine
Petite Gold Brass Flower Center (6mm Stamen, No Hole), 10 Pieces, Charm #59 from Monarch Pine. Petite Gold Brass Flower Center (6mm Stamen, No Hole), 10 Pieces, Charm #59 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
Petite Gold Brass Flower Center (6mm Stamen, No Hole), 10 Pieces, Charm #59
Petite Gold Brass Flower Center (6mm Stamen, No Hole), 10 Pieces, Charm #59 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
Petite Gold Brass Flower Center (6mm Stamen, No Hole), 10 Pieces, Charm #59 is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$3.50
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges
Petite Leaf Stainless Steel Charm (Choice of Silver or Gold), 20 Pieces, Charm #54 from Monarch Pine. Petite Leaf Stainless Steel Charm (Choice of Silver or Gold), 20 Pieces, Charm #54 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
Petite Leaf Stainless Steel Charm (Choice of Silver or Gold), 20 Pieces, Charm #54
Petite Leaf Stainless Steel Charm (Choice of Silver or Gold), 20 Pieces, Charm #54 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
Petite Leaf Stainless Steel Charm (Choice of Silver or Gold), 20 Pieces, Charm #54 is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$4.00
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges
Petite Red Apple Gold-Plated Enamel Charms, 10 Pieces, Charm #16 from Monarch Pine. Petite Red Apple Gold-Plated Enamel Charms, 10 Pieces, Charm #16 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
Petite Red Apple Gold-Plated Enamel Charms, 10 Pieces, Charm #16
Petite Red Apple Gold-Plated Enamel Charms, 10 Pieces, Charm #16 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
Petite Red Apple Gold-Plated Enamel Charms, 10 Pieces, Charm #16 is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$5.25
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges
Petite Red Cherry Gold-Plated Enamel Charms, 10 Pieces, Charm #17 from Monarch Pine. Petite Red Cherry Gold-Plated Enamel Charms, 10 Pieces, Charm #17 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
Petite Red Cherry Gold-Plated Enamel Charms, 10 Pieces, Charm #17
Petite Red Cherry Gold-Plated Enamel Charms, 10 Pieces, Charm #17 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
Petite Red Cherry Gold-Plated Enamel Charms, 10 Pieces, Charm #17 is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$5.25
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges
Petite Silver Brass Flower Center (6mm Stamen, No Hole), 10 Pieces, Charm #60 from Monarch Pine. Petite Silver Brass Flower Center (6mm Stamen, No Hole), 10 Pieces, Charm #60 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
Petite Silver Brass Flower Center (6mm Stamen, No Hole), 10 Pieces, Charm #60
Petite Silver Brass Flower Center (6mm Stamen, No Hole), 10 Pieces, Charm #60 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
Petite Silver Brass Flower Center (6mm Stamen, No Hole), 10 Pieces, Charm #60 is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$3.50
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges
Petite White Butterfly Gold-Plated Enamel Charms, 10 Pieces, Charm #18 from Monarch Pine. Petite White Butterfly Gold-Plated Enamel Charms, 10 Pieces, Charm #18 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
Petite White Butterfly Gold-Plated Enamel Charms, 10 Pieces, Charm #18
Petite White Butterfly Gold-Plated Enamel Charms, 10 Pieces, Charm #18 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
Petite White Butterfly Gold-Plated Enamel Charms, 10 Pieces, Charm #18 is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$5.25
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges
Petite White Star Gold-Plated Enamel Charms, 10 Pieces from Monarch Pine. Petite White Star Gold-Plated Enamel Charms, 10 Pieces from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
Petite White Star Gold-Plated Enamel Charms, 10 Pieces
Petite White Star Gold-Plated Enamel Charms, 10 Pieces from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
Petite White Star Gold-Plated Enamel Charms, 10 Pieces is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$5.25
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges
Petite White/Yellow Daisy Gold-Plated Enamel Charms, 10 Pieces, Charm #13 from Monarch Pine. Petite White/Yellow Daisy Gold-Plated Enamel Charms, 10 Pieces, Charm #13 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
Petite White/Yellow Daisy Gold-Plated Enamel Charms, 10 Pieces, Charm #13
Petite White/Yellow Daisy Gold-Plated Enamel Charms, 10 Pieces, Charm #13 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
Petite White/Yellow Daisy Gold-Plated Enamel Charms, 10 Pieces, Charm #13 is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$5.25
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges
Pink Happy Face Enamel and Alloy Pendant Charm, 10 Pieces from Monarch Pine. Pink Happy Face Enamel and Alloy Pendant Charm, 10 Pieces from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
Pink Happy Face Enamel and Alloy Pendant Charm, 10 Pieces
Pink Happy Face Enamel and Alloy Pendant Charm, 10 Pieces from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
Pink Happy Face Enamel and Alloy Pendant Charm, 10 Pieces is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$5.25
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges
Pumpkin (Orange and Gold) Enamel and Alloy Pendant Charm, 10 Pieces, Charm #14 from Monarch Pine. Pumpkin (Orange and Gold) Enamel and Alloy Pendant Charm, 10 Pieces, Charm #14 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
Pumpkin (Orange and Gold) Enamel and Alloy Pendant Charm, 10 Pieces, Charm #14
Pumpkin (Orange and Gold) Enamel and Alloy Pendant Charm, 10 Pieces, Charm #14 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
Pumpkin (Orange and Gold) Enamel and Alloy Pendant Charm, 10 Pieces, Charm #14 is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$5.75
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges
Regular Gold Brass Flower Center (12mm Stamen, No Hole), 10 Pieces, Charm #57 from Monarch Pine. Regular Gold Brass Flower Center (12mm Stamen, No Hole), 10 Pieces, Charm #57 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
Regular Gold Brass Flower Center (12mm Stamen, No Hole), 10 Pieces, Charm #57
Regular Gold Brass Flower Center (12mm Stamen, No Hole), 10 Pieces, Charm #57 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
Regular Gold Brass Flower Center (12mm Stamen, No Hole), 10 Pieces, Charm #57 is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$4.50
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges
Regular Silver Brass Flower Center (12mm Stamen, No Hole), 10 Pieces, Charm #58 from Monarch Pine. Regular Silver Brass Flower Center (12mm Stamen, No Hole), 10 Pieces, Charm #58 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
Regular Silver Brass Flower Center (12mm Stamen, No Hole), 10 Pieces, Charm #58
Regular Silver Brass Flower Center (12mm Stamen, No Hole), 10 Pieces, Charm #58 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
Regular Silver Brass Flower Center (12mm Stamen, No Hole), 10 Pieces, Charm #58 is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$4.50
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges
Regular Three Feather Brass Charms, 10 Pieces, Charm #93 from Monarch Pine. Regular Three Feather Brass Charms, 10 Pieces, Charm #93 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
Regular Three Feather Brass Charms, 10 Pieces, Charm #93
Regular Three Feather Brass Charms, 10 Pieces, Charm #93 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
Regular Three Feather Brass Charms, 10 Pieces, Charm #93 is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$5.50
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges
Silver & Maroon Coffin Enamel and Alloy Pendant Charm, 10 Pieces, Charm #12 from Monarch Pine. Silver & Maroon Coffin Enamel and Alloy Pendant Charm, 10 Pieces, Charm #12 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
Silver & Maroon Coffin Enamel and Alloy Pendant Charm, 10 Pieces, Charm #12
Silver & Maroon Coffin Enamel and Alloy Pendant Charm, 10 Pieces, Charm #12 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
Silver & Maroon Coffin Enamel and Alloy Pendant Charm, 10 Pieces, Charm #12 is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$5.75
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges
Silver 10mm Stainless Steel Charm Bezels, 10 Pieces, Charm #49 from Monarch Pine. Silver 10mm Stainless Steel Charm Bezels, 10 Pieces, Charm #49 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
Silver 10mm Stainless Steel Charm Bezels, 10 Pieces, Charm #49
Silver 10mm Stainless Steel Charm Bezels, 10 Pieces, Charm #49 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
Silver 10mm Stainless Steel Charm Bezels, 10 Pieces, Charm #49 is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$4.50
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges
Silver 12mm Stainless Steel Charm Bezels, 10 Pieces, Charm #50 from Monarch Pine. Silver 12mm Stainless Steel Charm Bezels, 10 Pieces, Charm #50 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
Silver 12mm Stainless Steel Charm Bezels, 10 Pieces, Charm #50
Silver 12mm Stainless Steel Charm Bezels, 10 Pieces, Charm #50 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
Silver 12mm Stainless Steel Charm Bezels, 10 Pieces, Charm #50 is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$4.50
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges
Silver 12mm Stainless Steel Charm Connector (Double Loop), 10 Pieces, Connector #45 from Monarch Pine. Silver 12mm Stainless Steel Charm Connector (Double Loop), 10 Pieces, Connector #45 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
Silver 12mm Stainless Steel Charm Connector (Double Loop), 10 Pieces, Connector #45
Silver 12mm Stainless Steel Charm Connector (Double Loop), 10 Pieces, Connector #45 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
Silver 12mm Stainless Steel Charm Connector (Double Loop), 10 Pieces, Connector #45 is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$4.50
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges
Silver and White Snowflake Enamel and Alloy Pendant Charm, 10 Pieces, Charm #23 from Monarch Pine. Silver and White Snowflake Enamel and Alloy Pendant Charm, 10 Pieces, Charm #23 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
Silver and White Snowflake Enamel and Alloy Pendant Charm, 10 Pieces, Charm #23
Silver and White Snowflake Enamel and Alloy Pendant Charm, 10 Pieces, Charm #23 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
Silver and White Snowflake Enamel and Alloy Pendant Charm, 10 Pieces, Charm #23 is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$5.75
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges
Silver Brass Moon Phase Pendant, 10 Pieces, Charm #95 from Monarch Pine. Silver Brass Moon Phase Pendant, 10 Pieces, Charm #95 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
Silver Brass Moon Phase Pendant, 10 Pieces, Charm #95
Silver Brass Moon Phase Pendant, 10 Pieces, Charm #95 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
Silver Brass Moon Phase Pendant, 10 Pieces, Charm #95 is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$5.50
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges
Silver Brass Narrow Arch 3-Hole Arch Connectors, 10 Pieces, Connector #57 from Monarch Pine. Silver Brass Narrow Arch 3-Hole Arch Connectors, 10 Pieces, Connector #57 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
Silver Brass Narrow Arch 3-Hole Arch Connectors, 10 Pieces, Connector #57
Silver Brass Narrow Arch 3-Hole Arch Connectors, 10 Pieces, Connector #57 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
Silver Brass Narrow Arch 3-Hole Arch Connectors, 10 Pieces, Connector #57 is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$4.50
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges
Silver Brass Open Hexagon 1-Hole Charm, 10 Pieces, Charm #104 from Monarch Pine. Silver Brass Open Hexagon 1-Hole Charm, 10 Pieces, Charm #104 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
Silver Brass Open Hexagon 1-Hole Charm, 10 Pieces, Charm #104
Silver Brass Open Hexagon 1-Hole Charm, 10 Pieces, Charm #104 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
Silver Brass Open Hexagon 1-Hole Charm, 10 Pieces, Charm #104 is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$6.00
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges
Silver Brass Triple Chain Pendant, 10 Pieces, Charm #83 from Monarch Pine. Silver Brass Triple Chain Pendant, 10 Pieces, Charm #83 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
Silver Brass Triple Chain Pendant, 10 Pieces, Charm #83
Silver Brass Triple Chain Pendant, 10 Pieces, Charm #83 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
Silver Brass Triple Chain Pendant, 10 Pieces, Charm #83 is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$5.50
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges
Silver Brass Two-Chain Connector With Loops, 10 Pieces, Connector #4 from Monarch Pine. Silver Brass Two-Chain Connector With Loops, 10 Pieces, Connector #4 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
Silver Brass Two-Chain Connector With Loops, 10 Pieces, Connector #4
Silver Brass Two-Chain Connector With Loops, 10 Pieces, Connector #4 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
Silver Brass Two-Chain Connector With Loops, 10 Pieces, Connector #4 is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$6.50
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges
Silver Brushed Brass Triangle Art Deco Charms, 10 Pieces, Charm #97 from Monarch Pine. Silver Brushed Brass Triangle Art Deco Charms, 10 Pieces, Charm #97 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
Silver Brushed Brass Triangle Art Deco Charms, 10 Pieces, Charm #97
Silver Brushed Brass Triangle Art Deco Charms, 10 Pieces, Charm #97 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
Silver Brushed Brass Triangle Art Deco Charms, 10 Pieces, Charm #97 is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$5.00
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges
Silver Daisy 1-Hole Brass Charms, 10 Pieces, Charm #111 from Monarch Pine. Silver Daisy 1-Hole Brass Charms, 10 Pieces, Charm #111 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
Silver Daisy 1-Hole Brass Charms, 10 Pieces, Charm #111
Silver Daisy 1-Hole Brass Charms, 10 Pieces, Charm #111 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
Silver Daisy 1-Hole Brass Charms, 10 Pieces, Charm #111 is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$6.50
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges
Silver Drama/Comedy Charms, Tragedy Masque Mardi Gras Plated Brass Charms, 10 Pieces from Monarch Pine. Silver Drama/Comedy Charms, Tragedy Masque Mardi Gras Plated Brass Charms, 10 Pieces from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
Silver Drama/Comedy Charms, Tragedy Masque Mardi Gras Plated Brass Charms, 10 Pieces
Silver Drama/Comedy Charms, Tragedy Masque Mardi Gras Plated Brass Charms, 10 Pieces from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
Silver Drama/Comedy Charms, Tragedy Masque Mardi Gras Plated Brass Charms, 10 Pieces is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$5.00
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges
Silver Medium 2-Hole Sunburst Connector, 10 Pieces, Connector #58 from Monarch Pine. Silver Medium 2-Hole Sunburst Connector, 10 Pieces, Connector #58 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
Silver Medium 2-Hole Sunburst Connector, 10 Pieces, Connector #58
Silver Medium 2-Hole Sunburst Connector, 10 Pieces, Connector #58 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
Silver Medium 2-Hole Sunburst Connector, 10 Pieces, Connector #58 is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$4.50
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges
Silver Rounded Trapezoid 2-Hole Hammered Brass Connectors, 10 Pieces, Connector #54 from Monarch Pine. Silver Rounded Trapezoid 2-Hole Hammered Brass Connectors, 10 Pieces, Connector #54 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
Silver Rounded Trapezoid 2-Hole Hammered Brass Connectors, 10 Pieces, Connector #54
Silver Rounded Trapezoid 2-Hole Hammered Brass Connectors, 10 Pieces, Connector #54 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
Silver Rounded Trapezoid 2-Hole Hammered Brass Connectors, 10 Pieces, Connector #54 is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$5.00
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges
Small Cowboy Boot Stainless Steel Charm (Silver or Gold), 10 Pieces, Charm #9 from Monarch Pine. Small Cowboy Boot Stainless Steel Charm (Silver or Gold), 10 Pieces, Charm #9 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
Small Cowboy Boot Stainless Steel Charm (Silver or Gold), 10 Pieces, Charm #9
Small Cowboy Boot Stainless Steel Charm (Silver or Gold), 10 Pieces, Charm #9 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
Small Cowboy Boot Stainless Steel Charm (Silver or Gold), 10 Pieces, Charm #9 is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$7.00
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges
SOURCE & VENDOR
Monarch Pine
Small Cross Stainless Steel Charm (Silver or Gold), 10 Pieces, Charm #4 from Monarch Pine. Small Cross Stainless Steel Charm (Silver or Gold), 10 Pieces, Charm #4 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
Small Cross Stainless Steel Charm (Silver or Gold), 10 Pieces, Charm #4
Small Cross Stainless Steel Charm (Silver or Gold), 10 Pieces, Charm #4 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
Small Cross Stainless Steel Charm (Silver or Gold), 10 Pieces, Charm #4 is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$7.00
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges
SOURCE & VENDOR
Monarch Pine
Small Scallop Shell Stainless Steel Charm (Silver or Gold), 10 Pieces, Charm #1 from Monarch Pine. Small Scallop Shell Stainless Steel Charm (Silver or Gold), 10 Pieces, Charm #1 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
Small Scallop Shell Stainless Steel Charm (Silver or Gold), 10 Pieces, Charm #1
Small Scallop Shell Stainless Steel Charm (Silver or Gold), 10 Pieces, Charm #1 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
Small Scallop Shell Stainless Steel Charm (Silver or Gold), 10 Pieces, Charm #1 is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$7.00
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges
SOURCE & VENDOR
Monarch Pine
Sunrise Stainless Steel Pendant (Silver or Gold), 10 Pieces, Charm #2 from Monarch Pine. Sunrise Stainless Steel Pendant (Silver or Gold), 10 Pieces, Charm #2 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
Sunrise Stainless Steel Pendant (Silver or Gold), 10 Pieces, Charm #2
Sunrise Stainless Steel Pendant (Silver or Gold), 10 Pieces, Charm #2 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
Sunrise Stainless Steel Pendant (Silver or Gold), 10 Pieces, Charm #2 is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$8.00
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges
SOURCE & VENDOR
Monarch Pine
https://monarchpine.com/products/sunrise-stainless-steel-pendant-silver-or-gold-10-pieces-charm-2
Triangle Art Deco Gold Brushed Brass Charms, 10 Pieces, Charm #96 from Monarch Pine. Triangle Art Deco Gold Brushed Brass Charms, 10 Pieces, Charm #96 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
Triangle Art Deco Gold Brushed Brass Charms, 10 Pieces, Charm #96
Triangle Art Deco Gold Brushed Brass Charms, 10 Pieces, Charm #96 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
Triangle Art Deco Gold Brushed Brass Charms, 10 Pieces, Charm #96 is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$5.00
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges
Turquoise Oval Stainless Steel Charm (Silver or Gold), 10 Pieces, Charm #6 from Monarch Pine. Turquoise Oval Stainless Steel Charm (Silver or Gold), 10 Pieces, Charm #6 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
Turquoise Oval Stainless Steel Charm (Silver or Gold), 10 Pieces, Charm #6
Turquoise Oval Stainless Steel Charm (Silver or Gold), 10 Pieces, Charm #6 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
Turquoise Oval Stainless Steel Charm (Silver or Gold), 10 Pieces, Charm #6 is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$8.00
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges
SOURCE & VENDOR
Monarch Pine
White and Gold Ghost Enamel & Alloy Charm, 10 Pieces, Charm #15 from Monarch Pine. White and Gold Ghost Enamel & Alloy Charm, 10 Pieces, Charm #15 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
METAL BLANK
White and Gold Ghost Enamel & Alloy Charm, 10 Pieces, Charm #15
White and Gold Ghost Enamel & Alloy Charm, 10 Pieces, Charm #15 from Monarch Pine — a precision-cut metal blank ready for laser engraving, stamping, or personalization.
Overview
White and Gold Ghost Enamel & Alloy Charm, 10 Pieces, Charm #15 is crafted from high-quality metal, designed specifically for makers who want clean engravings and professional results. Each blank features smooth edges and a consistent finish that takes laser engraving beautifully.
Available in a variety of finishes, these blanks are compatible with most CO₂ and fiber laser systems. Use them for jewelry making, personalized gifts, keychains, and more.
Specifications
Material
Stainless steel / aluminum alloy
Finish
Brushed, polished, or plated
Compatibility
CO₂ & fiber laser systems
Supplier
Monarch Pine
Price
$5.75
✅ Use Cases
- Personalized jewelry & accessories
- Custom keychains & charms
- Wedding & event favors
- Engraved name tags & ID blanks
- Pet ID tags
🔥 Engraving Tips
- Use a fiber laser for deep, high-contrast metal engraving
- Apply Cermark or Brilliance spray for CO₂ lasers on bare metal
- Clean with IPA before engraving for best adhesion
- Test power/speed settings on scrap first
- Vector artwork at 600+ DPI for crisp edges